Best current price£5.50from eBay
Shopping.co.uk recommended and popular offers
eBay£5.50Visit shop From The Anvil 51727 Satin Brass 2.5"" Tubular Mortice Latch
Visit shop
B&Q£6.75Visit shop B&Q - Polished Brass 2 1/2" Tubular Mortice Latch
Visit shop11 offers from £5.50 - £26.40
View price history by clicking the chart icon.
The From The Anvil 3 Inch Tubular Mortice Latch is an essential hardware component designed for homeowners and DIY enthusiasts looking to install internal sprung lever handles. This gold-finish latch provides a reliable, smooth mechanism for standard doors, featuring a 57mm backset that ensures compatibility with most modern door furniture; however, users should note that it is specifically engineered for use with sprung handles and may not provide adequate return tension if paired with unsprung handles.
| Colour | Gold |
|---|---|
| Model Part Number | 51733 |
| Brand | From The Anvil |
Yes, the latch is supplied with a matching strike plate and the necessary wood screws for a full installation.
This is a standard latch. For a bathroom, you would typically need a 'bathroom sashlock' or a tubular bathroom latch that accommodates a thumb turn and release.
The backset is the distance from the edge of the door to the center of the hole drilled for the spindle.
You should check your local building regulations regarding fire door hardware; specialized fire-rated latches are often required.
Yes, but ensure your door has sufficient timber blocking at the latch height to provide a secure grip for the screws.
Verify that your door handles are 'sprung'. This latch does not provide the tension required for unsprung handles.
Check the alignment of the strike plate on the door frame. The latch bolt should align perfectly with the hole in the strike plate.
Apply a small amount of light PTFE or silicone-based lubricant to the latch bolt. Avoid heavy greases that attract dust.
To install this latch, you will need to drill a 25mm diameter hole into the edge of the door to accommodate the latch case, followed by a mortice chisel to recess the faceplate flush with the wood. Ensure the backset measurement of 57mm is checked against your door's existing preparation before drilling. Regarding compatibility, this latch is specifically designed for sprung lever handles. If you use it with unsprung handles, you may find the handle fails to return to a horizontal position. To maintain the gold finish, clean the faceplate occasionally with a soft, dry cloth; avoid abrasive cleaners or acidic chemicals that could strip the protective coating.
