Crocs Classic Fleece Lined Clogs - Blue - UK 9

While the `Croslite™` material itself is water-resistant, the fleece lining is designed for warmth and can get wet. Prolonged exposure to heavy rain or snow is not recommended as the lining will absorb moisture and take time to dry, which can diminish comfort.

The fleece lining should be spot cleaned gently with a mild detergent and cold water. Avoid machine washing or using hot water, as this can damage the fleece. After cleaning, allow the clogs to air dry completely away from direct heat.

Crocs Classic Fleece Lined Clogs generally fit true to size. This specific pair is a UK adult size 9. If you are between sizes, or prefer a roomier fit with thick socks, you might consider sizing up.

No, the sherpa fleece lining in the Classic Fleece Lined Clogs is integrated into the clog and is not designed to be removable. It is permanently attached for consistent warmth and comfort.

'Dual Crocs Comfort™' indicates that the clogs are designed with a blissfully supportive, soft, and cradling feel. This enhanced cushioning comes from the unique `Croslite™` foam footbed, providing superior comfort all day long.

No, it is strongly advised not to put your Crocs Classic Fleece Lined Clogs in a washing machine or dryer. High heat can cause the `Croslite™` material to shrink, warp, or damage the fleece lining. Always air dry them.

Crocs are generally known for their roomy fit. The Classic Clog design, even with the fleece lining, often accommodates wider feet comfortably. However, individual fit may vary.

Ensure the pivoting heel strap is either engaged behind your heel for a more secure fit or pushed forward for a relaxed fit. If the size still feels off, double-check your foot size against Crocs' sizing guide or consider trying a different size.

The fleece lining can absorb moisture. To remedy, spot clean the lining with a mild soap and cold water, then allow the clogs to air dry completely for at least 24 hours in a well-ventilated area away from direct heat. Ensuring thorough drying is crucial to prevent odors.

Use a damp cloth and mild soap to wipe down the `Croslite™` exterior. For tougher marks, a soft brush can be used gently. Avoid abrasive cleaners, which can damage the material.

Ensure you are inserting Jibbitz™ correctly. Push them through the holes from the top until the black base snaps into place on the inside. To remove, push from the inside; do not pull from the top, which can stretch the holes.

Squeaking can sometimes occur due to friction between your foot and the footbed, especially if there's moisture. Ensure your feet and the inside of the clogs are completely dry. A light dusting of talcum powder on the footbed can sometimes help reduce friction.