Urbex Riven Concrete Paving Slabs - Buff 450 x 450 x 38mm

One pack contains 52 slabs and covers a total area of 10.5 square meters.

These slabs are designed for patios and pathways. For driveways, a thicker, more robust paving solution specifically designed for vehicular weight would be recommended.

While you can mix colours, these particular slabs are only available in the 450 x 450 x 38mm size. Mixing different sizes would require careful planning for a cohesive design.

A stable, well-compacted base is crucial. This typically involves digging out the area, adding and compacting a layer of hardcore or aggregate, and then topping with a layer of sharp sand for bedding.

The Urbex Riven Concrete Paving Slabs come with a 10-year manufacturer's guarantee, subject to their terms and conditions.

Regular sweeping is advised. For cleaning, use a stiff brush with water and a mild detergent. Avoid harsh chemicals.

As a natural product, some variation in colour between batches and even within a single slab can occur. This is a characteristic of the material.

Check the bedding sand layer and ensure it is evenly compacted and level. Re-lay any affected slabs if necessary, ensuring a consistent depth of sand.

Regularly sweep the slabs. For stubborn growth, use a stiff brush with warm soapy water or a dedicated patio cleaner suitable for concrete. Ensure good drainage to minimize moisture retention.

Natural colour variations are inherent to this product. Ensure the slabs are clean; sometimes dirt can mask the true colour. Avoid using abrasive cleaning agents.

This can occur if heavy objects are dropped or if the base is not adequately prepared. Ensure a solid, compacted base was used during installation. Minor chips can sometimes be concealed with appropriate repair fillers.