Best current price£16.98from eBay
Shopping.co.uk recommended and popular offers
eBay£16.98Visit shop Fine Decor Carbon Oxidize Grey Wallpaper Wood Panel Rustic Metallic Feature Wall
Visit shop
B&Q£21.99Visit shop B&Q - Carbon Oxidize Grey Wall Panel Stripe Metallic Wallpaper M1751
Visit shop5 offers from £16.98 - £21.99
View price history by clicking the chart icon.
This Crown Carbon Oxidize wallpaper is designed for homeowners looking to add a rustic, textured feel to their living spaces, particularly as a feature wall. Its key benefit is the realistic wood panel print with metallic accents that creates a striking, modern-rustic aesthetic. A potential caveat is the textured, non-woven background, which may require specific application techniques.
| Colour | Grey |
|---|---|
| Brand | Crown |
You should use a high-quality adhesive specifically formulated for non-woven (also known as paste-the-wall) wallpapers. Always follow the adhesive manufacturer's instructions.
While it is washable, it is not recommended for very high-moisture areas like shower enclosures or behind a cooker. It is best suited for living rooms, bedrooms, or hallways.
Light marks can be gently wiped away with a soft cloth dampened with water. Avoid using abrasive cleaners or excessive moisture, as this could damage the textured finish or metallic elements.
A 'Free Match' means you do not need to worry about aligning the pattern between strips. You can hang each strip side-by-side without matching a specific point in the design, making application much simpler and reducing waste.
'Good Light Fastness' indicates that the wallpaper is designed to resist significant fading from exposure to normal daylight. However, prolonged direct sunlight can still cause fading over many years.
Yes, this wallpaper is classified as 'Peelable,' meaning it can be dry-stripped from the wall, typically leaving the surface ready for the next wallpaper or a coat of paint with minimal residue.
The roll size is 10 meters long by 0.53 meters wide, covering approximately 5.32 square meters (57.7 sq.ft).
Gently lift the affected area of the wallpaper and re-smooth it onto the wall, ensuring even adhesive coverage and working from the center outwards. Small bubbles may disappear as the adhesive dries.
Check that the correct adhesive for non-woven wallpaper has been used and applied evenly to the wall. Ensure the wall surface was properly prepared (clean, dry, and possibly primed).
While this wallpaper has a free match, ensure strips are hung straight. If a slight misalignment is noticed on a non-repeating design element, slightly adjust the position of the strip before the adhesive fully sets.
Use a very sharp knife or a professional trimming tool and a straight edge (like a metal ruler or a specialized wallpaper smoother with a cutting edge) for clean cuts at edges and corners.
Setup:
Compatibility:
Care:
