iRobot Roomba Max 705 Combo Robot Vacuum & Mop + AutoWash Dock - White

The AutoWash Dock automatically cleans the PowerSpin Roller Mop after each cleaning session and can wash/dry for up to 8 weeks based on one mopping run per week. However, it's recommended to visually inspect and manually clean them if debris appears heavily accumulated.

No, this robot vacuum does not have the capability to climb stairs or detect them. It is designed to clean floors and will stop if it reaches a drop-off point due to its cliff detection sensors.

Vacuuming mode focuses solely on suction to pick up dry debris. Combo cleaning mode engages both vacuuming and the wet mopping function to clean up dry debris and wet messes simultaneously.

Battery life varies depending on cleaning mode and power settings. With a 6000 mAh Lithium-Ion battery, it can clean for extended periods, and the robot will automatically return to the dock to recharge if needed.

It is recommended to use only iRobot-approved cleaning solutions to ensure optimal performance and to prevent damage to the robot and dock. Check the product manual for recommended solutions.

The Roomba Max 705 Combo automatically adjusts its cleaning settings for carpets and hard floors. It retracts its mop when on carpet to prevent excess moisture and increases suction power on carpets to lift debris.

The robot offers up to 13000 Pa of suction power, with 175x more suction compared to the Roomba 600 series in spot clean mode with a full battery.

Ensure the dock is plugged in and the robot is properly seated on the charging contacts. Clean the charging contacts on both the robot and the dock with a dry cloth.

Check for blockages in the brushes, filters, and intake. Clean or replace the filter if it is dirty. Ensure the dustbin is not full.

Ensure the mop rollers are clean and not excessively worn. Check the water tank level and ensure the correct amount of solution is used. Clean the dock's roller washing system if performance degrades.

Clear any obstructions in the cleaning area. Ensure the room maps are accurate in the app. Check for software updates for the robot and app.

Verify that your Wi-Fi network is working and the robot is within range. Restart the robot, dock, and your Wi-Fi router. Re-pair the robot with the app if necessary.

Check if the dust bag in the dock needs replacement or if the water tanks are empty/full. Ensure there are no blockages in the dock's emptying or washing systems. Refer to the dock's manual for specific troubleshooting steps.