Plasplugs Heavy Duty Plasterboard Hollow Wall Anchor Pack of 30 - Blue

These Plasplugs anchors are specifically designed for plasterboard and general cavity walls. They are not suitable for solid masonry walls like brick or concrete.

Info needed: The maximum weight capacity depends on various factors including plasterboard thickness and condition, as well as the number of anchors used. Always refer to the product packaging or official specifications for precise load ratings. For critical applications, always consult a professional.

Once installed and expanded, these hollow wall anchors are generally not designed for reuse. Attempting to remove them often damages both the anchor and the surrounding plasterboard, requiring wall repair.

The integrated depth gauge helps ensure you drill the pilot hole to the precise depth required for the anchor. This is crucial for the anchor to expand correctly and provide maximum holding power without damaging the wall.

No, a compatible drill bit is included in the pack. This ensures you have the correct size for optimal anchor performance.

This product is sold as a pack of 30 heavy-duty plasterboard hollow wall anchors.

Info needed: While the Multi-Thread technology offers some versatility, it's best to use screws recommended by Plasplugs or those specifically designed to fit these anchors for optimal performance and safety. Refer to the product packaging for recommended screw sizes.

This usually indicates the drilled hole is too large. Ensure you used the correct drill bit size (the one provided) and did not over-drill. If the hole is too large, you may need to patch and re-drill slightly away from the original spot, or use a larger diameter anchor if appropriate.

Verify that the hole depth matches the anchor length. The included depth gauge is critical for this. If the hole is too shallow, the anchor may not fully expand. Also, ensure the plasterboard itself is strong enough for the application; very old or damp plasterboard may not provide sufficient support.

Check that you are using a screw with appropriate threading and diameter for the anchor. While Multi-Thread technology is versatile, mismatched screws can prevent proper engagement. Ensure the anchor is fully inserted and not damaged internally.

Drill bits can break if excessive force is applied, if drilling at an incorrect angle, or if hitting an unexpected obstruction. Always drill straight and apply steady, moderate pressure. If broken, you will need to replace it with a high-quality drill bit of the exact same size.

This suggests the anchor may not be fully expanded or the load is too heavy for the anchor's capacity or the wall's integrity. Carefully remove the item, inspect the anchor and wall. If necessary, remove the anchor, patch the wall, and re-install with new anchors, potentially adding more anchors or choosing a different mounting solution if the weight exceeds the product's limits.