Stiga GT 330 A Petrol Brush Cutter - 25.4 cc 2-stroke

Use a mix of unleaded petrol and 2-stroke engine oil, following the manufacturer's recommended ratio.

Consult the user manual for the specific procedure. Generally, you'll need to remove the strimmer head, rewind the line, and reassemble.

Remove the air filter cover, take out the filter, and either tap it to remove debris or wash it with soapy water (if applicable). Ensure it's dry before re-installing.

The Stiga GT 330 A comes with a 5-year warranty from the date of purchase.

Drain the fuel tank, clean the unit, and store it in a dry and secure place, away from direct sunlight and extreme temperatures.

Always wear safety glasses, gloves, and sturdy footwear. Avoid trimming in wet conditions and be aware of your surroundings.

Replacement parts can be found at authorized Stiga dealers or online retailers specializing in garden equipment.

Check fuel level, spark plug condition, and choke setting. Ensure the on/off switch is in the correct position.

Check and replace the strimmer line. Clean the strimmer head and ensure the cutting line is at the correct length.

Check the air filter, fuel filter, and spark plug. Adjust the carburetor if necessary.

Tap the strimmer head firmly on the ground to release the line.