Stiga BC 760 B Petrol Brush Cutter

Always refer to the product manual for the precise fuel-oil ratio. Typically, for 2-stroke engines, it is a 50:1 ratio (50 parts petrol to 1 part high-quality 2-stroke oil).

Ensure the engine is off and the cutting attachment is cool. Remove the existing attachment by following the instructions in the manual, then securely install the desired attachment.

The air filter should be checked for dirt before each use and cleaned regularly. Clean it more frequently if operating in dusty conditions. Replace it if it is damaged or cannot be cleaned effectively.

Empty the fuel tank or use a fuel stabilizer. Clean the entire machine. Lightly oil external metal parts to prevent rust. Store in a dry, protected location.

This model comes with a minimum of a 2-year warranty. Please refer to the warranty documentation for full details and terms.

When the cutting line becomes short, simply tap the head firmly on the ground while the engine is running at a suitable speed. This action automatically advances the cutting line.

Check fuel level and ensure correct fuel/oil mixture. Verify spark plug is clean and properly gapped. Ensure the choke is in the correct position for starting. Check air filter for blockages.

Clean or replace the air filter. Check the fuel lines for kinks or blockages. Ensure the spark plug is functioning correctly. The carburetor may need adjustment or cleaning.

Ensure the cutting line or blade is sharp and undamaged. Check for any entanglement around the cutting head. Increase engine throttle.

Ensure all components, especially the cutting head or blade, are securely fastened. Check for damage to the blade or line. Ensure the engine is running smoothly.