Best current price£8.52from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£8.52Visit shop Timco Yellow 127Y Window Fabrication Screws - Countersunk - Ph - Self-Tapping - Self-Drilling Point - 3.9 X 45 Box 500
Visit shop
B&Q£13.63Visit shop B&Q - Window Fabrication Screws Countersunk Ph Self-Tapping Self-Drilling Point Yellow3.9 X 45
Visit shop29 offers from £8.52 - £23.25
View price history by clicking the chart icon.
This guide is for professionals and DIY enthusiasts installing window frames and hardware onto steel-reinforced materials. The key benefit is a secure, reliable fix that meets industry standards. A potential caveat is that these are specifically for applications with steel reinforcement. The TIMco Window Fabrication Screw features a metric thread and a self-drilling point, designed as an alternative to self-tapping screws for applications requiring robust fastening in steel-reinforced frames. It boasts a zinc and yellow finish for corrosion resistance and has undergone rigorous testing to ensure performance and compliance.
| Colour | Yellow |
|---|---|
| Model Part Number | 153Y |
| Brand | Timco |
These screws feature a metric thread and a self-drilling point designed to create its own thread in materials like steel reinforcement. Self-tapping screws typically require a pre-drilled hole and cut their own thread, which can be a different process and may not be as effective in harder steel.
Yes, the zinc and yellow finish provides good corrosion resistance, making them suitable for rural and sheltered areas. However, constant exposure to harsh marine or industrial environments may degrade the finish over time.
No drill bit is typically needed as the screw has a self-drilling point. You will need a Phillips head screwdriver or driver bit to install it.
These screws are specifically tested and recommended for steel reinforcement within window frames. While they might penetrate other softer metals, their performance and thread integrity might vary significantly. Always test in a small area first if considering non-specified materials.
A countersunk head means the head of the screw is designed to sit flush with the surface of the material it's fastening into, providing a clean, non-protruding finish.
The M4 x 25mm length is specified. Ensure this length is appropriate for your application, considering the thickness of the component being attached and the depth required for secure fastening into the steel reinforcement.
These are British Standards. Detailed specifications can usually be found on the official British Standards Institution (BSI) website or through industry-specific technical libraries. They outline the testing procedures for corrosion resistance and performance in window and door installations.
Ensure the screw is correctly aligned and that the steel reinforcement is sufficiently thick and accessible for the self-drilling point. Verify you are using the correct tool and that it is set to an appropriate speed and torque. For exceptionally hard steel, a pilot hole might be necessary.
Use a high-quality Phillips driver bit that fits snugly. Ensure the driver is perpendicular to the screw head. Avoid over-tightening, especially once the screw has seated firmly.
While designed for corrosion resistance, prolonged exposure to highly aggressive environments or damage to the coating can lead to corrosion. Ensure the installation environment is within the product's intended use (rural/sheltered). If corrosion is significant, consider replacing the screw.
Setup:
Compatibility:
Care:
