Everbuild 700T LMN Silicone - Black - 700TBK

The sealant typically skins over in 10-20 minutes and achieves a full cure within 24 hours, depending on bead size and environmental conditions (temperature and humidity).

No, Everbuild 700T LMN Silicone is not designed to be painted over once cured.

Yes, it is suitable for interior use, especially in areas prone to dampness like bathrooms or kitchens, due to its mould-resistant properties. Ensure good ventilation during application.

Unopened cartridges typically have a shelf life of 12 months when stored in cool, dry conditions away from direct sunlight.

Uncured sealant can be wiped away with a damp cloth. For more stubborn residue, mineral spirits can be used, followed by a wipe with a damp cloth.

Neutral cure silicones, like the 700T, cure without releasing strong odors and are less corrosive to metals. Acetic cure silicones release a vinegar-like smell during curing and can be corrosive.

Ensure the cartridge's inner seal is punctured and the nozzle is cut to size. Check that the sealant gun is functioning correctly.

Verify the surface is clean, dry, and free from dust, grease, or contaminants. Re-apply after proper surface preparation.

Work in smaller sections, apply the sealant, and smooth it immediately. Ensure good ventilation but avoid direct drafts which can accelerate skinning.

While formulated for mould resistance, severe conditions may still lead to growth. Ensure adequate ventilation in the area and clean with a mild detergent. Re-application with a fresh cartridge may be necessary in persistent cases.