Best current price£7.70from B&Q
Shopping.co.uk recommended and popular offers
B&Q£7.70Visit shop B&Q - Single Toggle Light Switch 2-WayClassic Iridium With Iridium ToggleXit1
Visit shop6 offers from £7.70 - £13.17
View price history by clicking the chart icon.
The Varilight 1-Gang Toggle Switch is an ideal choice for homeowners and interior designers seeking a blend of classic aesthetic appeal and modern electrical functionality. Designed to control both mains and low-voltage lighting systems, this switch offers a tactile, high-quality feel that elevates standard wall fixtures. While its bevel-edged grey finish offers a sophisticated, versatile look, potential buyers should note that installation requires a standard back box and basic electrical knowledge to ensure safe operation.
| Colour | Grey |
|---|---|
| Model Part Number | Xit1 |
| Brand | Varilight |
No, this is a standard on/off switch. You will need a Varilight dimmer switch if you require light level adjustment.
No, this product is designed for indoor use only and is not weather-resistant.
Yes, the switch supports both 1-way and 2-way circuit configurations.
The switch is rated for a maximum of 10 amps.
Standard toggle switches typically only require live and switched-live connections in a UK wiring setup; check your local electrical code.
Yes, the grey finish is applied to be resistant to fading and standard daily wear.
Check all wire connections at the terminal block to ensure they are secure and that the live wire is in the 'common' terminal.
Verify that the switch faceplate is mounted level and that no debris is inside the toggle mechanism; if the issue persists, ensure the wall box is not recessed too deeply.
Installation requires a standard single-gang electrical wall box. Before beginning, ensure the mains power is isolated at the consumer unit. Use a voltage tester to verify the circuit is dead. Connect your live supply wire to the 'common' terminal and your switched live to the relevant L1 or L2 terminals depending on your wiring configuration. Tighten all screws firmly but avoid over-tightening to prevent damage to the plastic housing. For care, simply wipe the faceplate with a dry or slightly damp microfiber cloth. Do not use harsh chemical cleaners or abrasive sponges, as these can dull the grey finish and scratch the beveled edges over time.
