Best current price£38.66from Debenhams
Shopping.co.uk recommended and popular offers
Debenhams£38.66Visit shop Pegdev Unisex Yellow 3 X Tins Of Bitumen Cold Joint Sealer 750Ml Spray Adhesive Tack Coat Moisture Sealant In
Visit shop4 offers from £38.66 - £63.67
View price history by clicking the chart icon.
The Pegdev Bitumen Cold Joint Sealer Spray is designed for professionals and DIY enthusiasts looking for a reliable solution for tarmac repairs, gutter sealing, and road maintenance. It offers a convenient, high-performance adhesive tack coat that seals gaps against moisture to significantly enhance the durability of asphalt and concrete repairs. While its spray-on application is highly efficient, users should note that the product requires proper ventilation and a curing period of up to 24 hours for full structural integrity.
| Colour | Yellow |
|---|---|
| Model Part Number | 0732068739331 |
| Brand | Pegdev |
The sealer is typically touch dry within 10 minutes.
No, this product is designed for outdoor applications only due to the nature of the aerosol fumes.
No, the spray-on formula acts as its own adhesive tack coat, eliminating the need for a separate primer.
For best adhesion results, the surface should be clean and dry. Avoid application during heavy rain or standing water.
The product requires 24 hours to reach a full cure.
Remove the nozzle and soak it in a solvent like white spirit, or replace the nozzle if blockage persists.
You are likely holding the can too close or moving too slowly; maintain a consistent distance and speed while spraying.
Ensure the surface is completely free of dust, grease, and moisture before re-applying the product.
To prepare for use, shake the canister vigorously for at least one minute to ensure the bitumen solids are properly mixed. Hold the spray roughly 20-30cm from the target area and apply a consistent, even layer. The product is compatible with most asphalt, tarmac, and concrete surfaces. For care and maintenance of the tool, invert the canister and spray for 2-3 seconds after every use to clear the nozzle and prevent clogging. Store in a cool, dry place away from direct heat sources to maintain the pressure of the propellant.
