Briwax Wax Polish - Clear - 400g

Briwax Wax Polish is versatile and suitable for wood (bare, French polished, sealed), leather, metal, and painted surfaces.

The surface must be clean, dry, and free from dust, grease, or old finishes. For unfinished wood, light sanding is recommended for a smooth finish.

Typically, Briwax needs to haze for 5-10 minutes before buffing. The final cure time depends on temperature and humidity, but the surface should feel dry and hard to the touch before use.

Briwax is primarily designed for interior use. While it offers protection, it is not formulated for prolonged exposure to outdoor elements like UV radiation and moisture.

Reapplication frequency depends on usage. For most indoor furniture, reapplying every 6 to 12 months is usually sufficient. High-traffic items may require more frequent application.

The clear formulation is designed to enhance the natural color and grain without adding significant pigment. However, it will impart a subtle depth and sheen.

The Clear version enhances the natural material without adding color. The colored versions (Dark Oak, Antique Pine, etc.) contain a pigment that can subtly alter or deepen the color of the surface while also providing the protective wax finish.

This often indicates the wax was applied too thickly or not allowed to haze sufficiently. Try buffing again with a clean, dry cloth. If that doesn't work, apply a very small amount of new wax over the problem area, let it haze, and buff again. Alternatively, a solvent-based cleaner (like mineral spirits) on a cloth can help remove excess wax before reapplication.

Ensure the wax was applied evenly and in a consistent direction. Avoid applying in direct sunlight or on very hot surfaces. If streaking occurs, apply another thin coat, allow it to haze, and buff thoroughly. For stubborn streaks, gently remove with mineral spirits and reapply.

This can be due to moisture trapped in the wax or applying over a surface that was not completely dry. Ensure the surface is fully dry before application. If white marks appear, try buffing vigorously. If they persist, gently wipe the area with mineral spirits and reapply a thin coat.

The wax may not have fully dried or cured. Ensure adequate drying time in a well-ventilated area. Avoid placing items on the surface until it feels completely dry and hard to the touch. Apply a very thin top coat and buff vigorously to resolve stickiness.