Reisser Cutter Pozi Screw - 5.0 x 90mm - Yellow

The primary advantage is its ability to provide fast, accurate driving with a reduced risk of wood splitting, ensuring a clean finish.

These screws are ideal for use in softwood, chipboard, and most hardwoods.

A pilot hole is typically not needed, thanks to the sharp needle point. However, pre-drilling might be necessary in very dense hardwoods to prevent breakage.

It means the screws have a coating that provides up to 20 times more rust resistance compared to standard screws, making them suitable for various environments.

The waxed thread reduces driving resistance, requiring less torque and making the screwing process easier and faster.

The patented slots prevent the wood from splitting, especially when screwing close to the edge of the material.

Use a Pozi drive bit that fits the screw head precisely. This will prevent stripping and ensure the best performance.

Use the correct size Pozi drive bit and ensure it is in good condition. Reduce the torque setting on your drill/driver.

Ensure the drill/driver is perpendicular to the surface. Check for obstructions that may be preventing the screw from seating correctly.

Pre-drill pilot holes if working in dense hardwoods or increase the torque setting, using the correct bit. Make sure the screw length is appropriate for the material thickness.