Sandtex Masonry Paint - Mid Stone - Brown

Coverage varies, but typically one litre covers approximately 10-12 square meters. Check the product label for specific coverage details.

Drying times vary depending on weather conditions, but it generally takes a few hours to touch dry and 12-24 hours for a recoat.

No, Sandtex Masonry Paint is specifically designed for masonry surfaces. Using it on wood is not recommended.

Use a stiff brush or pressure washer to remove loose debris, dirt, and any existing flaking paint. Allow the surface to dry completely before painting.

Yes, priming is recommended for bare or porous surfaces to ensure proper adhesion and a uniform finish.

Yes, the paint provides a waterproof barrier, protecting the exterior walls from water damage.

Warranty information is available on the product packaging, this may vary depending on the retailer.

Ensure the surface is clean and primed correctly. Remove any loose paint or debris before applying the paint.

Check for moisture issues and ensure the surface is properly prepared and primed.

Ensure thorough mixing of the paint before application and apply an even coat.

Apply the paint within the recommended temperature range and avoid applying thick coats.