Snowdon Timber Tongue and Groove Shiplap Cladding - 12mm x 120mm x 2400mm

Yes, once the boards have fully dried from their pressure-treatment process, you can apply wood paint or exterior-grade stains.

No, you should avoid placing the cladding in direct contact with the ground. Use a base frame or gravel boards to elevate the timber.

Yes, always apply a high-quality wood preservative to any cut ends to maintain protection against rot and moisture.

Each board is 12mm thick, which is ideal for shedding and wall paneling applications.

While moisture resistant, it is not recommended for high-humidity areas like showers unless treated with marine-grade waterproof sealants.

Check for debris in the groove or slight warping; lightly sand the tongue if necessary to remove surface obstructions.

Ensure the boards were sealed with an exterior-grade wood preservative after cutting, as the cut ends expose untreated timber.

Ensure the boards were fixed with adequate spacing for expansion and that they were allowed to acclimatize before being attached to the frame.