Snowdon Timber Untreated Reject Tongue and Groove Matchboard Cladding - 12 x 120 x 1200mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Snowdon Timber matchboard cladding is ideal for DIY enthusiasts and professionals seeking a budget-friendly, rustic aesthetic for interior or exterior wall and ceiling projects. The key benefit is its highly versatile, untreated softwood surface that can be customized with your choice of paint, stain, or varnish. Please note that as these are reject boards, they may feature natural wood imperfections, such as knots or minor grain irregularities, which should be accounted for in your design plan.
All features
| Model Part Number | 12 x 120 x 1200mm |
|---|---|
| Brand | Snowdon Timber |
Extended Product Information
FAQs
Can I use these boards outdoors?
Yes, but because they are untreated, you must apply a high-quality exterior-grade wood preservative, stain, or paint to protect them from weather and rot.
What does 'reject' grade mean?
Reject boards may have natural defects such as larger knots, resin pockets, or minor milling irregularities that do not meet premium grading standards.
Do I need to sand the wood before finishing?
It is highly recommended to perform a light sand to smooth out any rough patches and remove surface dust to ensure an even finish.
Can these be installed directly onto plasterboard?
It is better to install them onto timber battens secured to the wall to allow for slight movement and to provide a secure fixing point.
How should I store the boards before use?
Store them horizontally in a dry, well-ventilated area, away from direct heat sources and direct contact with a concrete floor.
Troubleshooting
Boards are not fitting together smoothly
Check the tongue for any debris or splinters from the manufacturing process and lightly sand the groove if necessary.
Wood showing signs of cupping
Ensure the timber was properly acclimatized and that there is adequate airflow behind the cladding using a batten system.
Knots showing through paint
Apply a knotting solution or a specialized stain-blocking primer before painting the boards.
Pros and Cons
Pros
- Cost-effective solution for large cladding projects
- Easy to cut and install due to the lightweight softwood material
- Highly customizable with paints, varnishes, or oils
- Classic tongue and groove design ensures clean lines
- Adds genuine rustic character to walls and ceilings
Cons
- Requires finishing (sealing/painting) to protect against moisture
- Contains natural imperfections due to reject grading
- Not suitable for load-bearing structural applications
- Requires acclimatization before installation
Setup, Compatibility & Care
To ensure the best results, follow these installation guidelines:
- Acclimatization: Store the boards in the room where they will be installed for at least 48 hours to allow the timber to adjust to ambient moisture levels.
- Installation: Use appropriate timber battens as a sub-frame. Fix the boards using lost-head nails or pins, driving them through the tongue into the batten.
- Finish: Always sand the surface lightly before applying your chosen stain or paint. Use a high-quality primer if you intend to paint the boards white or light colors to prevent resin bleed.
- Maintenance: Periodically check for any seasonal expansion and ensure the finish remains intact to prevent the wood from absorbing excess moisture.