Johnstone's Woodcare Garden Colours - Night Shore - 2.5L

Johnstone's Woodcare Garden Colours is specifically designed for use on exterior wooden surfaces such as sheds, fences, and planters.

Typically, two coats are recommended for optimal colour and protection, but the number of coats may vary depending on the wood type and desired effect.

Drying time varies depending on weather conditions. Allow sufficient time for each coat to dry completely before applying the next coat.

Ensure the surface is clean, dry, and free from any previous coatings, dirt, or mildew. Lightly sand the surface to create a smooth finish if needed.

Stir the stain thoroughly. Apply evenly with a brush or roller, following the wood grain.

Wipe away any drips or runs immediately with a clean cloth or brush and even out the stain.

Reapply the stain as needed, typically every few years, to maintain protection and colour vibrancy. Regularly inspect treated surfaces.

Ensure the wood surface is clean, dry, and free of any previous coatings. Lightly sand the surface before application.

Apply a second coat of the stain, allowing the first coat to dry completely before application.

Ensure proper surface preparation. Remove any loose stain and reapply after adequate surface preparation.