OMIDEAS Flat Joining Plates Straight Mending Repair Bracket - Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The OMIDEAS Flat Joining Plates are designed for DIY enthusiasts, woodworkers, and homeowners looking to reinforce or repair wooden structures, shelves, and furniture. These plates provide exceptional structural support and stability for various household projects, offering a rust-resistant, durable solution that blends seamlessly with dark-toned furniture. A primary caveat to note is that these plates are specifically sized at 76 mm by 16 mm, so users should verify their specific project dimensions before application to ensure they are appropriate for the load-bearing requirements.
All features
| Colour | Black |
|---|---|
| Model Part Number | SS80X16B |
| Brand | OMIDEAS |
Extended Product Information
FAQs
Can these plates be painted?
Yes, but ensure you use a metal-primer first to ensure the paint adheres properly to the black finish.
Are the mounting screws included?
Yes, each pack comes complete with the necessary mounting screws for quick installation.
Are these plates suitable for heavy-duty structural load-bearing?
These are designed for furniture repair and minor structural reinforcement. They are not intended to replace heavy-duty load-bearing structural steel.
What are the exact dimensions of the plates?
Each plate is 76 mm long, 16 mm wide, and 2 mm thick.
Do I need special tools to install them?
No, a simple screwdriver is sufficient. A power drill with a screwdriver bit can make installation faster.
Troubleshooting
Screw does not sit flush with the plate surface.
Ensure you are using the provided countersunk screws and that there is no debris in the hole recess.
Wood splits when installing the bracket.
Drill a small pilot hole that is slightly smaller than the diameter of the screw shank before final installation.
The joint still feels loose after installation.
Check that the wood fibers are not stripped. If stripped, use wood filler or a larger screw size to regain tension.
Pros and Cons
Pros
- High resistance to rust and corrosion
- Sleek black finish matches dark furniture
- Countersunk holes allow for a flush, professional finish
- Rounded edges minimize sharp surface hazards
- Includes mounting screws for immediate installation
Cons
- Fixed length of 76mm may not suit every furniture size
- Black finish may show scratches if abused
- Limited to flat, straight-joining applications
Setup, Compatibility & Care
To achieve the best results with your installation, follow these guidelines:
- Surface Preparation: Ensure the wood or surface is clean and level before placement. If working with soft wood, it is recommended to pilot-drill the holes slightly to prevent splitting.
- Alignment: Use a square or measuring tape to ensure the plate is perfectly centered across the joint you are reinforcing.
- Tightening: Drive the provided screws in manually or with a low-torque drill setting to ensure the screw heads sit flush within the countersunk recesses.
- Care: While these plates are designed to be rust-resistant, wiping them down with a dry cloth periodically will maintain the finish. If used in high-moisture outdoor areas, consider a light coat of clear protective wax to further prevent oxidation over extended periods.