Floor Nation Big Spin Deep Hurricane Tile Levelling System - Red

Name: Floor Nation Big Spin Deep Hurricane Tile Levelling System - Red
Brand: Floor Nation
SKU: sinanuf55g
Price: 34.99 GBP
Availability: InStock

The Big Spin Deep Hurricane system is designed to eliminate lippage and ensure perfect alignment f...

Best current price£34.99from B&Q

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular

B&Q£34.99Visit shop

B&Q - Big Spin Deep Hurricane 5mm Levelling Kit200 Pieces (50 Caps150 Bases)Suitable For Tiles Up To 25mm

Visit shop

One Offer

1 offer from £34.99

View price history by clicking the chart icon.

B&QB&Q - Big Spin Deep Hurricane 5mm Levelling Kit200 Pieces (50 Caps150 Bases)Suitable For Tiles Up To 25mm

Free delivery in 1–3 days

£34.99

Visit shop

Product Information

Full details

The Floor Nation Big Spin Deep Hurricane Tile Levelling System is designed for both professional tilers and ambitious DIYers looking to achieve a perfectly flat, lippage-free finish with large-format tiles. It excels at maintaining precise alignment across porcelain, ceramic, natural stone, marble, and LVT surfaces during the curing process; however, users should be aware that it requires specific base sizes to match their tile thickness, and bases are intended for single use while caps are reusable.

All features

Colour	Red
Model Part Number	BSHDK419
Brand	Floor Nation

Extended Product Information

FAQs

Can I use these on wall tiles?

Yes, this system is designed for both floors and walls.

Are the spacer bases reusable?

No, the spacer bases are designed for single use and will be snapped off after the adhesive cures.

What is the maximum tile thickness this system supports?

The system is compatible with tiles between 3mm and 20mm thick.

Do I need any special tools to tighten the caps?

The caps are designed to be tightened by hand for most applications.

Can this be used with natural stone?

Yes, it is fully compatible with natural stone, porcelain, ceramic, and LVT.

Troubleshooting

Spacer base snapping prematurely during installation

Check that the base is sitting flush in the adhesive and verify that the tile is not thicker than the 20mm limit.

Tile remains uneven after tightening

Ensure that the subfloor is adequately leveled and that enough adhesive was used to support the center of the tile.

Pros and Cons

Pros

Significantly reduces tile lippage for a professional finish
Reusable caps provide long-term value for future projects
Works effectively on both vertical wall and horizontal floor tiles
Compatible with a wide range of popular tile materials

Cons

Spacer bases are designed for single use and must be replenished
Requires proper planning to ensure sufficient base inventory for large areas
Not intended for tiles outside the 3mm-20mm thickness range

Setup, Compatibility & Care

To begin, ensure your substrate is clean and level before applying adhesive. Insert the spacer base into the mortar bed at the tile intersection. Once the neighboring tile is placed, thread the cap onto the base.

Compatibility: This system handles tiles between 3mm and 20mm. It is critical to confirm your tile thickness falls within this range to prevent breakage or loose alignment.

Care: After the adhesive has fully cured, kick or tap the base of the spacer with a rubber mallet in the direction of the grout joint to snap it off. Collect the reusable caps, wipe them clean of any stray adhesive residue using a damp cloth, and store them in a dry place to prevent wear on the threads.