Best current price£13.31from eBay
Shopping.co.uk recommended and popular offers
eBay£13.31Visit shop U-POL ISOPON ZINC 182 ANTI RUST PRIMER 450ML AEROL SPRAY INHIBITING RUST
Visit shop
B&Q£18.89Visit shop B&Q - Rust Inhibitor Grey Primer Spray Fast Drying Smooth Finish 450Ml
Visit shop12 offers from £13.31 - £20.01
View price history by clicking the chart icon.
1 offer from £15.43
View price history by clicking the chart icon.
This guide is for anyone looking to use the Isopon Multi-Purpose Primer Aerosol for a durable and smooth paint finish on various surfaces. The key benefit is its ability to provide a strong base for topcoats, improving adhesion and the final appearance. However, be aware that proper surface preparation is crucial for optimal results.
| Colour | Grey |
|---|---|
| Model Part Number | MPPG/AL |
| Brand | U-POL |
This primer is suitable for use on metal, wood, and some plastics.
Generally, one or two thin coats are sufficient. However, for porous surfaces, you may need additional coats.
Allow the primer to dry completely before applying the topcoat. Drying times may vary depending on conditions, but usually, 30 minutes to 1 hour is sufficient.
This primer is compatible with most topcoats. However, it's always recommended to check the topcoat manufacturer’s recommendations for compatibility.
Store the aerosol can in a cool, dry place away from direct sunlight and heat.
After use, invert the can and spray until only propellant comes out to clean the nozzle.
Wipe the nozzle clean with a suitable solvent, or replace it if necessary. Ensure the can is shaken well before each use.
Yes, light sanding is recommended to create a key for the primer to adhere properly.
Ensure the surface is properly cleaned, sanded, and free from contaminants. Apply thin, even coats of primer, allowing each coat to dry before applying the next.
Apply thinner coats and avoid holding the spray nozzle too close to the surface. Ensure proper drying time between coats.
Ensure the surface is properly prepared. Apply even coats and allow the primer to dry completely before applying the topcoat. Lightly sand between coats if needed.
