Snowdon Timber Treated Roofing Battens - 25x50x1800mm - 10 Pack

Pressure treatment forces preservatives deep into the wood, making it resistant to rot and insect damage.

Yes, although these battens are factory rejects. Ensure that they meet the structural requirements for roofing, and replace any defective pieces.

Smaller knots are usually acceptable. Avoid using battens with large or loose knots in load-bearing areas. Splits can be filled with wood filler.

Yes, you can paint or stain the battens after they have dried, following the manufacturer's instructions for the paint or stain.

Store the battens in a dry, covered area to protect them from weather and moisture. Elevate them off the ground to prevent contact with damp surfaces.

The lifespan depends on the application and environmental conditions. Pressure treatment significantly extends the life compared to untreated wood.

Refer to the product specifications and any accompanying documentation provided with your purchase.

Carefully select the straightest battens for critical structural components. Consider using these for less critical parts.

Clean the surface with a stiff brush and a solution of water and mild detergent. Allow the timber to dry completely.

Pre-drill pilot holes to ease installation and prevent splitting. Use appropriate screws/nails designed for treated timber.