Snowdon Timber Garden Treated Feather Edge Fence Board - Brown

While pressure-treated, it is best practice to keep timber slightly elevated from direct soil contact to maximize longevity.

No, the pressure treatment provides immediate protection. You can paint or stain them once the initial moisture from the treatment has dried.

Yes, they can be trimmed using standard woodworking saws, but remember to treat any cut ends with an end-grain preservative to maintain rot resistance.

The board measures 11mm in thickness, providing a robust profile for standard garden fencing.

Calculate based on the total length of your run divided by the width of the board (125mm), accounting for the specific overlap you choose for your installation.

These boards are designed for fencing. While they are treated, they are not optimized for the structural pressure of soil-filled raised beds.

Ensure boards are fixed with at least three points of contact on the horizontal rails and that they are not overly tight against each other, allowing for minor natural expansion.

Use only hot-dipped galvanized or stainless steel fixings. If non-galvanized nails were used, replace them immediately.

Gently clean with a soft-bristled brush and mild soapy water, avoiding high-pressure washers which can damage the treated surface fibers.