Gul FLEXOR 32 YULEX Full Wetsuit - Grey

YULEX(r) is a premium, plant-based material derived from responsibly managed forests, used as a sustainable alternative to petroleum-based neoprene. It offers excellent performance while significantly reducing environmental impact.

A 3/2mm wetsuit is generally suitable for water temperatures between 15°C and 20°C (59°F and 68°F). This can vary based on individual cold tolerance and wind conditions.

Always rinse with fresh, cold water after use. Hand wash with mild, specialized wetsuit shampoo if needed, and dry naturally away from direct sunlight. Avoid harsh chemicals and machine washing/drying.

This 3/2mm wetsuit is designed for moderate water temperatures. For colder conditions, a thicker wetsuit (e.g., 4/3mm or 5/4mm) with added thermal linings would be more appropriate.

Blindstitched seams are constructed by stitching through only one layer of the neoprene and then folding it over so the stitching on the second layer is hidden. This creates a strong, flexible, and highly water-resistant seam.

This is a system designed to minimize water entry through the back zip. The 'Flush Barrier' and the waterproof 'Blackout zipper' work together to create a secure seal, keeping you drier and warmer.

Yes, the FLEXOR 32 YULEX is versatile and suitable for various water sports such as kitesurfing, windsurfing, stand-up paddleboarding, and general watersports where thermal protection and freedom of movement are needed.

Ensure you have the correct size. Wetsuits should feel snug but not painfully tight. Try putting it on again, ensuring the material is smooth and not bunched up, especially in the seams and joints. Natural rubber can take a few wears to break in.

Check that the back zip is fully closed and the velcro neck flap is properly secured. Ensure the cuffs and ankles seals are snug against your skin. Minor flushing can occur, but significant leakage suggests a fit issue or a damaged seal.

Ensure the wetsuit is thoroughly rinsed after every use. Avoid harsh detergents. If minor seam fraying occurs, consider using a wetsuit repair adhesive specifically designed for neoprene or natural rubber.

Rinse thoroughly with fresh water. If the odor persists, hand wash with a specialized wetsuit cleaner. Ensure the wetsuit is completely dry before storing.

The Powrtex4 knee pads are designed for durability and may feel firm initially. They should become more flexible with use. Ensure the wetsuit is properly fitted, as discomfort can arise from the suit being too tight or too loose around the knee area.