Burbage Iron Craft Quorn Tall Double Garden Gate - Blue
Enhance your outdoor space with the Quorn Tall Double Garden Gate. Made from Scandinavian Redwood ...Enhance your outdoor space with the Quorn Tall Double Garden Gate. Made from Scandinavian Redwood from managed forests, these driveway gates offer both beauty and security. The gate features a decorative balustrade and interlocking tongue and groove boards for sturdiness and durability. They are treated with a general-purpose preserver to protect against rot, decay, mould, and blue-staining fungi, but a final finish should be applied after fitting for long-term protection. The frame is 70x70mm, bracing is 70x54mm & 95x14mm, and the tongue and groove boards are 95x14mm. Measurements are for the actual width of the gates, not openings. Please note that all timber gate sizes are subject to slight variation due to normal shrinkage or expansion. Limited stock is held, and these gates are often made to order, which can take up to 28 working days. A made-to-measure service is also available, potentially requiring up to 28 days. For orders over a quantity of 10, additional delivery charges may apply.
Burbage Iron Craft Unisex Brown Quorn Tall Double Garden Gate - Pressure Treated - W3000 X H1800 Mm InFree delivery in 1–3 days£850.36Visit shop →
Burbage Iron Craft Unisex Brown Quorn Tall Double Garden Gate - Pressure Treated - W3600 X H1800 Mm InFree delivery in 1–3 days£1,002.85Visit shop →
Product Information
Full details
This guide is for homeowners looking to enhance their outdoor space with secure and aesthetically pleasing driveway gates. The Quorn Tall Double Garden Gate offers a blend of beauty and security, crafted from durable Scandinavian Redwood. A key benefit is its robust construction and decorative design, providing an attractive entrance. A caveat to note is that these gates are often made to order and may have a lead time of up to 28 working days, with potential additional delivery charges for bulk orders.
All features
Colour
Blue
Model Part Number
5016635204732
Brand
Burbage Iron Craft
Extended Product Information
FAQs
What type of wood are these gates made from?
The gates are made from Scandinavian Redwood, sourced from managed forests.
Are the gates treated for outdoor use?
Yes, they are treated with a general-purpose preserver to protect against rot, decay, mould, and blue-staining fungi. However, a final finish must be applied after fitting for long-term protection.
How long will it take to receive my order?
These gates are often made to order, and delivery can take up to 28 working days. Made-to-measure services also require up to 28 days.
Can I get gates in a custom size?
Yes, a made-to-measure service is available, though it also requires up to 28 working days for production.
What are the dimensions of the gate frame and boards?
The frame is 70x70mm, bracing is 70x54mm & 95x14mm, and the tongue and groove boards are 95x14mm.
Do I need to apply any finish to the gates?
Yes, a final finish (like a stain or sealant) is highly recommended after fitting for long-term protection against the elements and to maintain the wood's condition.
Are there extra delivery charges for large orders?
Yes, for orders exceeding a quantity of 10 units, additional delivery charges may apply.
Troubleshooting
Gate is stiff or difficult to open/close
Check hinges for obstructions or rust. Ensure posts are stable and not leaning. Verify ground clearance is adequate. Lubricate hinges if necessary.
Wood shows signs of cracking or warping
This can be due to natural timber movement. Ensure a protective finish has been applied and maintained. If significant, consult a professional for repair or replacement advice.
Preservative treatment is peeling or ineffective
The initial treatment is for transit and storage protection. A final finish needs to be applied. Clean the surface and apply a suitable exterior wood finish.
Gate size does not match opening precisely
Minor variations can occur due to timber's natural properties. Adjustments may be needed by trimming or shimming, or consider the made-to-measure service for future purchases.
Pros and Cons
Pros
Constructed from sustainable Scandinavian Redwood.
Offers both security and an attractive decorative element.
Pre-treated against rot, decay, mould, and blue-staining fungi.
Sturdy build with a substantial frame and interlocking boards.
Made-to-measure service available for custom fits.
Cons
Potential lead time of up to 28 working days as often made to order.
Requires a final finish to be applied after fitting for optimal long-term protection.
Sizes are subject to slight variation due to natural timber shrinkage/expansion.
Additional delivery charges may apply for orders over 10 units.
Limited stock availability can lead to longer wait times.
Setup, Compatibility & Care
Setup:
Ensure gate posts are securely installed and correctly spaced to match the gate's actual width. Remember that timber gate sizes can vary slightly.
Attach hinges to the gate and posts, ensuring proper alignment and clearance.
Hang the gates, checking for smooth operation and adequate ground clearance.
Install latches and any locking mechanisms.
Final Finishing:
After fitting, apply a high-quality exterior wood stain, sealant, or paint. This is crucial for long-term protection against UV rays and moisture, preventing premature weathering.
Reapply the finish periodically as recommended by the product manufacturer for sustained protection.
Care:
Regularly inspect the gates for any signs of wear or damage.
Clean the gates with a damp cloth and mild soap if necessary. Avoid abrasive cleaners.
Ensure drainage around the posts is adequate to prevent waterlogging.
Compatibility:
These gates are designed to fit standard openings but please verify measurements carefully against your opening. Made-to-measure options are available for non-standard sizes.