Steinel Outdoor Wall Light - Black

The STEINEL L 190 S requires an E27 base lamp with a maximum system power of 100W. It is designed for incandescent lamps.

You can achieve up to 80% energy savings compared to using a conventional LED light without a motion detector that runs continuously for an average of 10 hours a day. This is because the L 190 S only activates when movement is detected, typically for much shorter periods.

No, the L 190 S is equipped with a light sensor that prevents it from activating during daylight hours or when sufficient ambient light is present.

The STEINEL Outdoor Wall Light L 190 S has a width of 217mm, a height/depth of 147mm, and a length of 335mm.

The light is designed for outdoor use with a durable die-cast aluminium housing and glass cover, suitable for typical exterior environments.

Refer to the product manual for specific instructions on adjusting sensor settings such as range, sensitivity, and duration. Some models offer these adjustments.

Check if the lamp is correctly installed and within the 100W limit. Verify the power supply is active and the light sensor has not prevented activation due to sufficient ambient light. Ensure the movement sensor is not obstructed.

The light sensor may be faulty or obstructed, or the ambient light setting might be too high. Check for any continuous light sources nearby that might be confusing the sensor. Ensure no constant motion is being detected if the 'on' time is set too long.

Adjust the sensor's position or angle if possible, or refer to the manual for specific adjustment options for range and sensitivity.

This function is a designed feature of the light. If it seems non-operational, ensure the correct lamp type is installed and the power supply is stable. Consult the manual for any specific requirements.