Alan Symonds Madison Pencil Pleat Lined Curtains - Grey

For curtain width, measure the length of your curtain track or pole (not the window itself) and multiply by 1.5 to 2.5 times for desired fullness with pencil pleats. For drop, measure from the top of your track/pole to where you want the curtain to end (e.g., sill, below sill, or floor). These curtains are sold in standard sizes, so choose the closest fit.

No, these curtains are described as offering 'filtered sunlight' and are fully lined, which provides privacy and some light reduction, but they are not designed to be blackout. They will soften incoming light rather than completely block it.

Yes, generally these curtains are machine washable on a gentle cycle at 30°C. However, always refer to the specific care label attached to your curtains for the most accurate and detailed washing instructions to ensure longevity and prevent damage. > Info needed: [Confirm specific washing instructions from product label].

These pencil pleat curtains are versatile and can be hung on most standard curtain poles using curtain rings with hooks, or on a curtain track using gliders and hooks. Ensure your pole or track is securely installed and robust enough for the curtain's weight.

Achieving uniform pleats involves gently pulling the gathering cords at the top of the tape until the curtain width matches your track/pole, then evenly distributing the gathered fabric. Secure the cords with a knot, and then insert your curtain hooks at regular intervals into the woven pockets on the tape. Adjust until the pleats fall neatly.

Typically, curtain hooks are not included with curtains and need to be purchased separately, as they are usually supplied with your curtain track or pole system. Only the matching tie-backs are included with this product.

Check the spacing of your curtain hooks along the pencil pleat tape. Adjust the position of the hooks to distribute the weight more evenly. Also, ensure the gathering cords are tied off securely and the pleats are evenly distributed across the entire width of the curtain.

Take the curtain down and lay it flat. Carefully untie the gathering cords at one end and re-gather the fabric, pulling the cords gently until the pleats are uniform and tight. Tie off the cords securely but not too tightly to allow for minor adjustments. Practice making the pleats even before re-hanging.

Gently iron the curtains on a low to medium heat setting, preferably on the reverse side. Always check the care label for specific ironing instructions. A garment steamer can also be effective for removing creases once the curtains are hung.

Ensure you have suitable wall hooks installed at the correct height for your tie backs. Experiment with different ways to loop or gather the curtain fabric with the tie back to achieve the desired drape and security. The tie back should hold the fabric firmly but not too tightly.