Unicorn SPiT Gel Stain and Glaze - Red
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
Unicorn SPiT Gel Stain and Glaze in Molly Red Pepper is an ideal choice for crafters, furniture upcyclers, and artists seeking a highly versatile, pigment-rich medium for wood, glass, metal, and fabric projects. Its unique gel consistency allows for easy application by hand or brush, while its non-toxic, jasmine-scented formula ensures a pleasant indoor workspace; however, users should be aware that the final opacity depends heavily on dilution and the porosity of the underlying substrate.
All features
| Colour | Red |
|---|---|
| Model Part Number | 5770002 |
| Brand | Unicorn SPiT |
Extended Product Information
FAQs
Can I use this on outdoor furniture?
It is intended for indoor use. If used outdoors, it must be thoroughly sealed with an outdoor-rated, UV-resistant water-based sealer.
Does it require a primer?
No, it is designed to penetrate porous surfaces directly. If applying to very smooth non-porous surfaces, a light scuff-sand is recommended.
Can I mix different colours?
Yes, Unicorn SPiT colours can be blended together to create custom hues.
Is it food safe?
No, this product is not intended for use on surfaces that will come into direct contact with food.
How long does it take to dry?
Drying time depends on the thickness of the application and humidity, but generally dries to the touch within a few hours.
Troubleshooting
The stain is not drying evenly
Ensure the surface was cleaned of all previous waxes, oils, or dust before application.
The colour is too light
Apply additional coats once the first layer is fully dry, or use the product full-strength without water dilution.
Streaking on smooth surfaces
Use a damp sponge or cloth to 'buff' the gel into the surface during application to ensure uniform distribution.
Pros and Cons
Pros
- Extremely versatile across multiple material types
- Easy to manipulate and blend during application
- Non-toxic formula with a pleasant aroma
- Simple water-based cleanup
- Excellent for creating custom, one-of-a-kind artistic finishes
Cons
- Requires proper sealing if used on high-traffic furniture
- Can be messy if not handled with care
- Drying times vary significantly based on dilution and humidity
Setup, Compatibility & Care
Before starting, ensure your work surface is free of wax or oils, as these can prevent the stain from adhering properly. For bare wood, a light sanding will improve penetration. To apply, simply squeeze the desired amount onto your surface or a palette and use your fingers, a foam brush, or a lint-free cloth to spread the gel.
Once the project is dry to the touch, you may choose to seal it with a water-based polyurethane or varnish to protect the finish from moisture, especially on surfaces like tables or cabinets. Avoid using oil-based sealers directly over the wet gel to prevent interaction issues. Clean brushes and hands immediately after use with warm, soapy water.