Smartseal - Anti Mould Paint - Pale Slate

Clean the surface thoroughly, removing any loose paint, dirt, or debris. Ensure the surface is dry and free from mould. Use a mould cleaner if necessary. Prime bare surfaces before applying the anti-mould paint.

Apply two coats for the best results and protection against mould.

Yes, it is ideal for use in bathrooms, kitchens, and other areas prone to moisture and mould.

Drying times can vary. Typically, allow 2-4 hours between coats and for the paint to fully cure. Check the product label for specific drying times.

Coverage is approximately 4-6m² per litre per coat.

Yes, the paint is washable. Use a mild detergent and a damp cloth to clean the surface.

Yes, Smartseal Anti-Mould Paint can be used on floors, providing a mould-resistant finish.

Ensure the surface is properly prepared, clean, and dry before application. Use a primer if necessary.

Address the source of the moisture (e.g., leaks, poor ventilation). Clean the surface thoroughly before repainting.

Apply the paint evenly, avoiding thick coats. Use two coats for better coverage and appearance.