Buster + Punch 2G Toggle Switch - Silver
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for anyone looking to install or understand the Buster + Punch 2G Toggle Switch - Silver. The switch offers a premium, stylish upgrade to standard light switches with its solid metal construction and diamond-cut knurled toggle. Keep in mind that professional electrical installation is recommended due to the nature of electrical work.
All features
| Colour | Silver |
|---|---|
| Model Part Number | 2G Toggle Switch |
| Brand | Buster + Punch |
Extended Product Information
FAQs
What is the voltage and current rating?
The switch is rated for 230v - 240v AC, 10 Amp.
What type of back box is required?
It requires a 70mm x 70mm back box with a 47mm recess depth.
Can this switch be used outdoors?
No, it is for indoor use only.
What is the material of the switch?
The switch is made of solid steel.
How do I clean the switch?
Clean the switch with a soft, damp cloth.
Is professional installation required?
Professional installation is recommended for electrical safety.
What is the dimension of the switch?
Height 88mm, Width 88mm, Projection 24mm.
Troubleshooting
Light doesn't turn on.
Check the circuit breaker and ensure the switch is wired correctly.
Switch feels loose.
Tighten the screws securing the switch to the back box.
The toggle is hard to move.
Make sure that the switch is not obstructed and all the internal components are properly aligned.
Pros and Cons
Pros
- Durable solid metal construction for long-lasting use.
- Stylish design enhances the aesthetics of any room.
- Diamond-cut knurled toggle provides a premium feel.
- Available in various finishes to match different interior styles.
Cons
- Requires a 70mm x 70mm back box with 47mm recess depth for installation.
- Professional installation is recommended for safety.
- May be more expensive than standard switches.
Setup, Compatibility & Care
Installation:
- Preparation: Ensure the power is OFF at the circuit breaker.
- Back Box: The switch requires a 70mm x 70mm back box with a 47mm recess depth.
- Wiring: Connect the wires according to the electrical diagram (professional installation recommended).
- Mounting: Secure the switch to the back box using the provided screws.
- Finishing: Attach the flat plate and tighten the penny button screws.
Compatibility:
- Compatible with standard 230v - 240v AC electrical systems.
- Suitable for use with various lighting types.
Care:
- Clean the switch with a soft, damp cloth.
- Avoid using abrasive cleaners or solvents.
- Ensure the power is off before cleaning.