Best current price£249.95from eBay
Shopping.co.uk recommended and popular offers
eBay£249.95Visit shop Harder & Steenbeck Infinity 2024 CRplus 2in1 Airbrush (0.25mm & 0.44mm) 122233
Visit shopeBay£249.99Visit shop HARDER & STEENBECK - INFINITY CRPLUS 2024 TWO IN ONE AIRBRUSH (0.25MM & 0.44MM)
Visit shop4 offers from £249.95 - £259.95
View price history by clicking the chart icon.
This guide is for artists and hobbyists seeking unparalleled control and precision in airbrushing. The Harder & Steenbeck Infinity 2024 CRplus 2in1 Airbrush offers exceptional atomization and detail, making it ideal for fine art, illustration, and model painting. However, mastering its advanced features may require some practice. This guide will help you understand the airbrush's features, proper use, maintenance, and address common issues.
| Colour | Silver |
|---|---|
| Model Part Number | 122233 |
| Brand | Harder & Steenbeck |
This airbrush is compatible with both water-based and solvent-based paints. Always check the paint manufacturer's recommendations for airbrush use.
Disassemble the airbrush, clean the parts with the appropriate cleaning solution for your paint type, and use a cleaning needle for the nozzle.
Air pressure depends on the paint viscosity, the nozzle size, and the desired effect. Start with a lower pressure and increase it gradually until you achieve the desired spray pattern.
Lubricate the needle and trigger mechanism after each cleaning or before extended use, using a lubricant designed for airbrushes.
The TITANIUM nozzle provides exceptional durability and performance, allowing for finer detail and greater control.
Replacement parts can be found from the manufacturer or through authorized retailers.
Clean the nozzle and needle thoroughly. Ensure the paint is properly thinned and free of debris. Check for air leaks.
Check the paint cup for clogs. Ensure the air compressor is providing adequate pressure. Check the needle for blockage. Make sure the paint is thin enough.
Check the nozzle for damage. Ensure all seals are properly seated. Tighten the nozzle if necessary.
