Best current price£358.70from Holloways of Ludlow
Shopping.co.uk recommended and popular offers
Holloways of Ludlow£358.70Visit shop Astro Lighting Harvard Coastal IP44 Wall Light - Brushed Brass Flush Wall Lights Wall Lights
Visit shop2 offers from £358.70
View price history by clicking the chart icon.
The Astro Lighting Harvard Coastal IP44 Wall Light is an ideal choice for homeowners living in harsh, marine-adjacent environments who require a blend of aesthetic elegance and long-term durability. This fixture offers the primary benefit of enhanced resistance against salt spray and coastal corrosion while maintaining a sophisticated, modern lantern silhouette; however, users should note that the bulb is not included, requiring a separate purchase of an E27 LED filament bulb to complete the installation.
| Colour | Bronze |
|---|---|
| Model Part Number | 55997560521089 |
| Brand | Astro Lighting |
Yes, it is specifically designed for coastal environments and provides superior resistance to salt spray and corrosion.
The fixture supports LED filament bulbs up to a maximum of 12 watts.
The IP44 rating makes it suitable for bathroom zones where splashing may occur, though it is primarily designed for exterior wall use.
No, the E27 bulb must be purchased separately.
You need a dimmer switch that is compatible with LED lighting to ensure smooth dimming without flickering.
It means the light is protected against solid objects larger than 1mm and is resistant to splashing water from all directions.
Check that the bulb is screwed in fully and verify that the power supply at the circuit breaker is active.
Ensure the installed bulb is marked as 'dimmable' and that your wall switch is compatible with LED loads.
Check that the glass seals and the backplate gasket are properly seated; remove any moisture and ensure the unit is sealed tightly.
Installation should always be performed by a qualified electrician to ensure all gaskets are correctly seated for the IP44 weather seal. Ensure the wall surface is flat; if the wall is uneven, consider using a mounting block to maintain the seal integrity.
For maintenance, wipe the fixture down periodically with a soft, lint-free cloth to remove salt deposits or grime buildup. Do not use abrasive cleaners or steel wool, as these can compromise the protective finish. Ensure the power is switched off at the mains before attempting to change the bulb or clean the glass panels.
