Dreamscene Pair of Thermal Ready Made Eyelet Blackout Curtains - Black

These curtains are made from 100% polyester, allowing for easy care. We recommend a gentle machine wash in cold water with similar colors. Tumble dry on low or air dry, and iron on a low setting if needed.

Yes, they feature a blackout weave lining inside the 100% polyester material, designed to effectively block out external light for maximum darkness and privacy.

A 'Double Face' curtain means the fabric has the same color and soft sheen on both the interior-facing and exterior-facing sides. This ensures a consistent, attractive look from both inside and outside your home.

Yes, the thermal properties of these curtains provide maximum insulation. They help keep heat in during colder months and block heat and light during warmer months, which can contribute to better temperature regulation and potentially lower energy consumption.

Yes, the eyelet ring top design is specifically chosen for quick and easy installation. Simply thread the eyelets onto your existing or new curtain pole, and adjust for an even drape.

They are described as 'heavyweight' due to their thermal and blackout properties. This contributes to their effectiveness but means you should ensure you have a sturdy curtain rod for proper support.

Ensure the curtains extend sufficiently beyond the window frame on all sides. Consider adding a blackout lining behind if light leakage around the edges persists, or check if the curtain width is adequate for the window.

Gently pull the fabric between each eyelet to create even folds. Allow the curtains to hang for a few days; gravity often helps them settle into a natural, smooth drape. Ensure the curtain pole is perfectly level.

Check the curtain pole for any rough spots or burrs that might be catching the eyelets. Ensure the pole is clean and free of debris. Applying a small amount of silicone spray to the pole can reduce friction.

Hang the curtains for a few days to allow creases to relax naturally. For stubborn wrinkles, use a garment steamer or iron on a very low setting on the reverse side of the fabric, taking care not to overheat.