WedDecor 2mm Silver Hollow Hole Punch - Silver
Best current price£114.99from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£114.99Visit shop B&Q - Rectangular Tablecloth 228Cm X 335CmWhite (Pack Of 10)
Visit shopB&Q£114.99Visit shop One Offer
1 offer from £114.99
View price history by clicking the chart icon.
B&QB&Q - Rectangular Tablecloth 228Cm X 335CmWhite (Pack Of 10)
Free delivery in 1–3 days
£114.99
Visit shop
Product Information
Full details
The WedDecor 2mm Silver Hollow Hole Punch is designed for crafters and DIY enthusiasts needing precise holes in various materials. Its key benefit is the durable, sharp steel construction ensuring clean cuts for projects like leatherworking, fabric crafting, and belt modification. A caveat is that it requires a hammer or mallet for operation, not suitable for those seeking a manual lever-action punch.
All features
| Colour | Silver |
|---|---|
| Model Part Number | WD-HP-SIL-2MM |
| Brand | Neel Blue |
Extended Product Information
FAQs
What materials can this hole punch be used on?
This punch is versatile and can be used on leather, fabric, rubber, vinyl, PVC, thin plastics, gaskets, soft wood, paper, cardboard, crafts, thin metal sheets, watch straps, belts, bags, and wallets.
What is the diameter of the hole produced?
The hole produced by this punch is precisely 2mm in diameter.
Do I need any special tools to use this punch?
Yes, you will need a hammer or mallet to strike the top of the punch to create the hole. A stable surface is also recommended for use.
How do I maintain the punch to prevent rust?
After use, wipe the punch clean and dry. Apply a light coat of oil to the cutting edge and shaft periodically, and store it in a dry place.
Can this punch be used for very thick leather or metal?
While durable, it is best suited for thin to medium thickness leather and very thin metal sheets. For excessively thick materials, multiple strikes or a different tool may be required.
Is the cutting edge replaceable if it becomes dull?
The cutting edge is integral to the steel construction and is not designed to be replaced. However, it is made from hardened steel, which maintains sharpness for a long time with proper use and care.
What is the main advantage of a hollow punch over a standard punch?
A hollow punch cuts a clean circle by shearing the material against an opening, resulting in a cleaner hole than punches that may simply crush the material. This design is excellent for precision.
Troubleshooting
Punch does not cut cleanly or leaves ragged edges.
Ensure the material is flat and stable. Strike the punch with a firm, even blow using a hammer or mallet. Check if the cutting edge is dull or damaged; sharpen or replace if necessary. For tougher materials, a harder striking surface might be needed.
Material gets stuck inside the punch.
Tap the end of the punch gently on the work surface to dislodge the material. Use a thin pick or needle to carefully remove any remaining pieces from the hollow end. Ensure the punch is cleaned after each use.
Punch is difficult to strike or penetrate.
Verify you are using adequate force with your hammer or mallet. Ensure the material is not too thick or dense for the punch's capacity. A harder striking surface (like a metal anvil or dense wood block) can improve penetration.
Punch appears to be rusting.
Clean the punch thoroughly with a dry cloth. Apply a light coat of machine oil or WD-40 to the entire surface, paying attention to the cutting edge. Store the punch in a dry environment away from moisture.
Pros and Cons
Pros
- Constructed from durable, heat-hardened steel for long-lasting sharpness.
- Produces clean, precise 2mm diameter holes.
- Versatile for use on a wide range of materials from soft leather to plastic.
- Resistant to rust and corrosion due to its silver finish.
- Cost-effective solution for creating custom holes.
Cons
- Requires a separate hammer or mallet for operation.
- Not suitable for very thick or hard metals.
- May require multiple strikes for denser materials.
- Can be less precise if not struck evenly.
- Smaller diameter may not suit all project needs.
Setup, Compatibility & Care
Setup:
- Place the material to be punched on a stable, hard surface (like a cutting mat or block of wood).
- Position the hollow punch at the desired location on the material.
- Strike the top of the punch firmly and evenly with a hammer or mallet.
- Remove the punch and clear the material from the hollow end.
Compatibility:
This hole punch is compatible with a wide range of materials, including:
- Leather (thin to medium thickness)
- Fabric
- Rubber
- Vinyl
- PVC
- Plastic (thin sheets)
- Gaskets
- Wood (soft types)
- Paper
- Cardboard
- Craft materials
- Thin metal sheets (e.g., aluminum foil, thin brass)
- Watch straps
- Belts
- Bags & Wallets
Care:
- After each use, wipe the punch clean to remove any material residue.
- Apply a light coat of oil to the cutting edge and shaft periodically to prevent rust, especially if stored for extended periods.
- Store in a dry place, preferably in its original packaging or a tool roll, to protect the cutting edge.
- Avoid using it on excessively thick or hardened materials that could damage the steel edge.