Xl Joinery Internal Salerno Oak Door - 2040 X 726 X 40mm

No, the XL Joinery Salerno Oak Door is supplied unfinished and requires painting or staining to complete.

This particular model is 2040mm in height, 726mm in width, and 40mm in thickness.

No, this is an internal door and is not designed or treated for exterior conditions.

Yes, hinges, handles, and any locking mechanisms are not included and must be purchased separately.

Yes, matching glazed and fire doors are available to create a cohesive look throughout your home.

It is recommended to lightly sand the door surface before applying any paint or stain to ensure a smooth and even finish.

Clean with a slightly damp cloth. Avoid harsh chemicals or excessive moisture.

Check for obstructions around the frame or hinges. Ensure the door has been hung correctly and the frame is plumb. The issue might also be due to the finish applied; if it's too thick, it could be binding.

Ensure the door was properly sanded before finishing. Apply thin, even coats of paint or stain and allow adequate drying time between coats. Consider using a primer if recommended for your chosen finish.

For unfinished doors, light scratches can usually be sanded out before applying a finish. For finished doors, depending on the finish type, you may be able to touch up the damaged area. Deep gouges may require more extensive repair or replacement.