DrainTex Non-Woven Drainage Geotextile Fabric - 2m x 50m - DRA225

Yes, it is excellent for ground stabilization and separation under driveways, provided it is laid between the subsoil and the aggregate base.

The fabric is designed for underground use. While it is stable during the installation process, it should be covered with aggregate to prevent long-term UV degradation.

It is recommended to have a minimum overlap of 300mm when joining two sheets of fabric to ensure soil particles do not enter the system.

While it can inhibit some weed growth, it is primarily designed as a drainage and separation fabric, not as a specialized weed control membrane.

No, the synthetic non-woven material is rot-resistant and designed specifically for long-term immersion in soil and water.

A standard, sharp utility knife or pair of heavy-duty scissors will cut through the material easily.

Check for sharp rocks or protruding roots in the trench; remove these hazards or add a thin layer of sand before laying the fabric.

Use landscaping pins or heavy staples to secure the edges of the fabric until you can begin backfilling.

Ensure the fabric is not buried under too much dense clay and that there is sufficient drainage aggregate beneath or around the area to encourage infiltration.