Rust-Oleum Bathroom Wall & Ceiling Paint - Grey
Best current price£33.99from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£33.99Visit shop B&Q - Portland Stone Matt Bathroom Wall & Ceiling Paint 2.5L
Visit shopB&Q£33.99Visit shop One Offer
1 offer from £33.99
View price history by clicking the chart icon.
B&QB&Q - Portland Stone Matt Bathroom Wall & Ceiling Paint 2.5L
Free delivery in 1–3 days
£33.99
Visit shop
Product Information
Full details
This guide is for homeowners and DIY enthusiasts looking to refresh their bathrooms with a durable and stylish paint. Rust-Oleum Bathroom Wall & Ceiling Paint provides a water-resistant, matt finish that combats moisture and condensation. However, it's important to note that this paint is not suitable for shower enclosures or areas with constant water contact. This guide covers key features, usage instructions, and troubleshooting tips to help you achieve the best results with this product.
All features
| Colour | Grey |
|---|---|
| Brand | Rust-Oleum |
Extended Product Information
FAQs
How much paint do I need?
Coverage is approximately 12m² per litre. Measure the area to be painted and calculate accordingly. Remember to buy enough paint for two coats.
Can I use this paint in a shower?
No, this paint is not suitable for shower enclosures or areas in constant contact with water.
What is the drying time?
Allow 2-4 hours of drying time between coats.
How do I clean the painted surfaces?
Wipe down surfaces with a damp cloth and mild detergent. Avoid abrasive cleaners.
Do I need to prime the surface before painting?
Priming is recommended for bare plaster, brick, or concrete walls. If painting over previously painted surfaces, ensure the existing paint is sound and well-adhered.
What kind of finish does this paint have?
It has a modern matt finish.
How long will the paint last?
It is formulated to resist cracking, peeling, and blistering for up to 6 years before initial maintenance when applied according to label instructions.
What tools do I need?
You'll need a brush or roller, a paint tray, and possibly masking tape and a sanding block for surface preparation. A 'Ready to Roll Kit' is available at half price with the purchase of a 2.5L tin of paint.
Troubleshooting
Paint is peeling or blistering.
Ensure the surface was properly prepared. Remove loose paint, sand the surface, and apply a primer before repainting. Check for moisture issues and address them before repainting.
Poor coverage or uneven finish.
Ensure the paint is thoroughly mixed. Apply two coats for optimal results. Use a good quality brush or roller and apply paint evenly.
Paint not adhering to the surface.
Make sure the surface is clean and free of contaminants. Ensure the surface is suitable for the paint. Allow sufficient drying time between coats.
Pros and Cons
Pros
- Resists moisture and condensation effectively.
- Provides a stylish, modern matt finish.
- Easy to apply with brush or roller.
- Available in a wide range of colours.
- Easy to clean.
- Durable and long-lasting.
Cons
- Not suitable for areas with constant water contact, such as inside shower enclosures.
- Requires two coats for optimal results.
- Coverage is approximately 12m² per litre, which may require multiple tins for larger bathrooms.
Setup, Compatibility & Care
Setup
- Surface Preparation: Ensure the surface is clean, dry, and free from loose paint, dirt, and grease. Lightly sand glossy surfaces to improve adhesion.
- Application: Stir the paint thoroughly before use. Apply the first coat evenly using a brush or roller.
- Drying Time: Allow the first coat to dry completely according to the manufacturer's instructions, typically 2-4 hours.
- Second Coat: Apply a second coat for full coverage and durability.
Compatibility
- Suitable Surfaces: Bare plaster, brick, concrete walls, and previously painted surfaces.
- Not Suitable: Shower enclosures or areas in constant contact with water.
Care
- Cleaning: Wipe down surfaces with a damp cloth and mild detergent. Avoid abrasive cleaners.
- Maintenance: Regularly inspect for any signs of damage and touch up as needed. Ensure good ventilation to prevent moisture build-up.