Best current price£13.50from eBay
Shopping.co.uk recommended and popular offers
eBay£13.50Visit shop Colour Forge Death Rattle Green Spray 500ml | Primer UK Only | Warmodels
Visit shop5 offers from £13.50 - £20.45
View price history by clicking the chart icon.
This Colour Forge spray primer is designed for hobbyists and miniature painters seeking a high-quality foundation for their projects without a premium price. Its key benefit is excellent coverage and adhesion, ensuring a smooth finish that enhances subsequent paint layers. A potential caveat is the need for thorough preparation before use to achieve optimal results.
| Colour | Green |
|---|---|
| Model Part Number | 233232 |
| Brand | Colour Forge |
You should shake the can vigorously for a minimum of 5 minutes to ensure the pigments and propellant are thoroughly mixed.
Hold the can approximately 12 inches (30 cm) away from your model or surface for optimal, even coverage.
After each use, turn the can upside down and spray for a few seconds until only clear propellant is released. This clears the nozzle.
Yes, this primer is suitable for use on plastic, resin, metal, and other common hobby materials.
Warming the can to room temperature helps the paint flow smoothly and evenly, improving the quality of the spray finish and preventing clogs.
It is designed as an excellent base for acrylic paints, but generally works well with most hobby paints, including enamels.
It means the 'Death Rattle Green' colour is designed to be a similar shade to the 'Grey Seer' primer offered by Games Workshop, providing a consistent base for painters familiar with that colour.
Ensure the can has been shaken thoroughly for at least 5 minutes and is at room temperature. Hold the can at the recommended distance and use short, sweeping passes.
Make sure the surface of the model is clean and free from dust, grease, or mold release agent. Re-shake the can and try applying a slightly thinner coat.
Always invert the can and spray until clear after use. If blockage occurs, try removing and cleaning the nozzle with appropriate solvent (e.g., warm water if using acrylic-based primer, or a specific paint thinner if recommended for the product type).
Apply multiple thin coats rather than attempting to achieve full coverage in one go. Ensure even strokes and allow each coat to dry slightly before applying the next.
To achieve the best results with the Colour Forge spray primer, ensure you follow these preparation and care steps:
