Extraction Rate (m3/h) - 391
Extraction Type - Ducted/Recirculating
Type of grease filter: Alumini...Extraction Rate (m3/h) - 391
Extraction Type - Ducted/Recirculating
Type of grease filter: Aluminium grease filters
3 speeds
Product Dimensions (HxWxD) (mm) - 630-1020 x 600 x 500
Stylish and practical this stainless steel chimney cooker hood from CDA is ideal for extracted unwanted cooking odours and fumes from small to medium sized kitchens. With a striking and functional curved glass canopy that helps capture airborne grease and steam this wall-mounted extractor has a powerful extraction rate that can be adjusted by tasteful push button controls.This CDA chimney hood has a maximum extraction rate of 391 m³/hr which is ideal for small to medium sized kitchens up to 62 cubic metres. With 3 speeds to choose from you can set the extraction rate to a level that best suits the dish you are cooking. It's also useful to have lower speeds that run quieter for when you sit down to dinner.The aluminium grease filters can be found on the bottom of the chimney hood and are designed to capture grease that's found in cooking fumes. They will need cleaning at least once a month depending on how much you use the cooker hood which is made easier by the filters being dishwasher safe.It also comes with a telescopic chimney section that can extend up or down to make the correct distance between the hob and the hood. There must be at least a 700mm distance between the hood and a gas hob and 600mm distance between the hood and an electric hob. What stands out . Stylish and practical stainless-steel chimney hoodStriking 60cm curved glass canopySuitable for ducted and recirculated extractionExtraction rate 391 m³/hr for small-medium kitchensExtracts unwanted cooking odours and fumesPowerful motor with 3 speeds to choose fromEasily adjusted by the simple push button controlsDishwasher safe aluminium grease filters . Technical Specifications . Extraction rate 391 m³/hrNoise level 60 dB(A)2 x LED lightsOutlet diameter 150 mmRated electrical power 100 WPower supply required 3 amps .
This guide is for anyone looking to understand and effectively use the CDA ECP62SS 60cm Curved Glass Chimney Cooker Hood. It provides a stylish and efficient solution for removing cooking odors and fumes from your kitchen. A key benefit is its powerful extraction rate of 391 m³/hr, suitable for small to medium-sized kitchens. Note that it requires either ducted or recirculating installation, so consider your kitchen's existing setup.
All features
Colour
Silver
Energy Efficiency
D
Model Part Number
ECP62SS
Brand
CDA
Extended Product Information
FAQs
How do I clean the grease filters?
The aluminum grease filters are dishwasher-safe. Alternatively, you can wash them by hand with warm, soapy water.
What type of extraction does this hood support?
It supports both ducted and recirculating extraction. For recirculating, you will need to purchase charcoal filters.
How often should I replace the charcoal filters?
Replace the charcoal filters every 3-6 months, depending on how frequently you use the cooker hood.
What is the correct distance between the cooker hood and my hob?
Maintain a distance of at least 700mm above a gas hob and 600mm above an electric hob.
Can I use this hood with a gas hob?
Yes, this cooker hood is compatible with both gas and electric hobs.
Where can I purchase replacement filters?
Replacement charcoal filters (CDA CHA17 or CHA24) are available from various retailers that sell CDA products.
What is the noise level of this cooker hood?
The noise level is 60 dB(A) at the highest speed setting.
What is the warranty period?
Warranty information is not available in the provided product details.
Troubleshooting
Cooker hood won't turn on.
Check the power supply and ensure the hood is properly plugged in. Check the circuit breaker.
Poor extraction performance.
Clean or replace the grease filters. Check for any obstructions in the ducting (if ducted).
Lights are not working.
Check the bulb and replace if necessary. Ensure the light switch is turned on.
Cooker hood is noisy.
Reduce the fan speed. Ensure the hood is properly installed and that the ducting is not constricted.
Suitable for both ducted and recirculating extraction.
Cons
Installation requires either ducting or the purchase of a recirculating kit.
Noise level can reach 60 dB(A) at high speed.
Energy efficiency class is D.
May require professional installation depending on your existing setup.
Setup, Compatibility & Care
Setup:
Installation: The hood can be installed for ducted or recirculating extraction. Ducted extraction requires connection to an external vent. Recirculating extraction requires charcoal filters (sold separately).
Distance: Maintain the correct distance between the hood and your hob: 700mm for gas and 600mm for electric.
Electrical: Ensure the power supply is 3 amps.
Compatibility:
Hob Compatibility: Suitable for use with both gas and electric hobs.
Filter Compatibility: Compatible with CDA CHA17 or CHA24 charcoal filters for recirculating operation.
Care:
Cleaning: Wipe the stainless steel surfaces with a soft, damp cloth and mild detergent. Avoid abrasive cleaners.
Grease Filters: Clean the aluminium grease filters at least monthly, or more frequently depending on usage. They are dishwasher safe.
Charcoal Filters: Replace charcoal filters every 3-6 months, depending on use, to maintain optimal performance.