JBL Live Beam 4 - Active Noise Cancellation - Green
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The JBL Live Beam 4 earbuds are designed for active individuals and audio enthusiasts seeking immersive sound with advanced noise cancellation. Their key benefit lies in delivering JBL's signature audio quality combined with effective noise blocking and clear call capabilities. A potential consideration is the battery life compared to some competitors during continuous heavy usage.
All features
| Colour | Green |
|---|---|
| Headphones Noise Cancellation | Active |
| Series | Live Beam 4 |
| Model Part Number | JBLLIVEBEAM4GRN |
| Brand | JBL |
Extended Product Information
FAQs
How long does the battery last on a single charge?
The earbuds provide up to 10 hours of playback on a single charge. The charging case provides an additional 30 hours, for a total of up to 40 hours.
Can I use only one earbud at a time?
Yes, you can use either the left or right earbud independently for listening to audio or taking calls.
What is the benefit of Hi-Res Audio Wireless?
Hi-Res Audio Wireless allows for the transmission of higher-fidelity audio streams compared to standard Bluetooth, resulting in more detailed and accurate sound reproduction from compatible sources.
How do I activate or adjust noise cancellation?
Noise cancellation can typically be controlled via the touch controls on the earbuds or through the JBL Headphones app, where you can also adjust ANC levels and enable Ambient Aware modes.
Are the JBL Live Beam 4 waterproof?
The JBL Live Beam 4 earbuds offer IPX5 water resistance, meaning they are protected against low-pressure water jets from any direction. They are suitable for workouts and light rain but not for submersion.
How do I reset the JBL Live Beam 4 earbuds?
To reset the earbuds, place them in the charging case, close the lid, and wait 5 seconds. Then, open the case and proceed with pairing. For a full factory reset, refer to the JBL Headphones app or the Quick Start Guide.
What sizes of eartips are included?
The package includes four sizes of eartips to help you find the most comfortable and secure fit for optimal sound and noise cancellation.
Troubleshooting
Earbuds not pairing
Ensure Bluetooth is enabled on your device. Reset the earbuds by placing them in the charging case, closing the lid, and waiting for 5 seconds. Then, re-open the case and try pairing again. Ensure earbuds are not connected to another device.
No sound from one earbud
Check if the earbud is properly seated in the charging case to ensure it's charged. Clean the charging contacts on both the earbud and the case. Try re-pairing the earbuds with your device. Ensure audio balance settings on your device are centered.
Poor noise cancellation performance
Ensure the eartips provide a good seal in your ear. Check the JBL Headphones app for any firmware updates or specific ANC settings that may need adjustment. Ensure the ANC feature is enabled.
Intermittent connection or audio dropouts
Ensure your device is within Bluetooth range. Minimize obstructions between your device and the earbuds. Try disabling other Bluetooth devices nearby that might cause interference. Update your device's operating system and the JBL Headphones app.
Charging issues
Ensure the charging case is charged. Clean the charging contacts on the earbuds and inside the case with a dry cotton swab. Try using a different USB cable and power adapter for the case.
Pros and Cons
Pros
- Exceptional JBL Signature Sound quality
- Effective Adaptive Noise Cancellation
- Clear and natural call quality with 6-mic system
- Long total battery life with quick charging capability
- Comfortable and secure fit for active use
Cons
- May not offer the absolute longest single-charge battery life compared to some high-end models
- Spatial Sound effectiveness can vary by content and personal preference
- Charging case size might be slightly larger than ultra-compact options
Setup, Compatibility & Care
Setup:
- Ensure the earbuds and charging case are charged. The LED indicator on the case shows the charging status.
- Open the charging case near your Bluetooth-enabled device.
- On your device, navigate to Bluetooth settings and select 'JBL Live Beam 4' from the list of available devices to pair.
- For enhanced features and customization, download and install the JBL Headphones app.
Compatibility:
- The JBL Live Beam 4 earbuds are compatible with most Bluetooth-enabled devices, including smartphones, tablets, and laptops running iOS, Android, Windows, and macOS.
Care:
- Cleaning Earbuds: Gently wipe the earbuds with a dry, soft cloth. Avoid using abrasive materials or liquids. Remove eartips and clean them separately with a slightly damp cloth, ensuring they are completely dry before reattaching.
- Cleaning Charging Case: Wipe the exterior of the charging case with a soft, dry cloth. Ensure the charging port is free of debris.
- Storage: Store earbuds and the case in a cool, dry place when not in use. Keep the charging contacts clean to ensure proper charging.