Timco Solo Chipboard & Wood Screws - 5.0 x 100mm - 100 Pack - Yellow
A single thread woodscrew mainly used in various types of timber and man-made boards or into mason...A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. Features: Double countersunk reduces the likelihood of head shear and assists completion of countersinking. Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion. 40° Deep single thread to provide a secure fixing with high pull-out resistance. 25° Sharp point and single lead for a fast start and improved thread acceptance. All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length. Finish: Zinc & Yellow. Head Type: Double Countersunk. Material: Carbon Steel. Thread Coverage: Partially Threaded. Driver Bi. CE Standard: WebBS EN 14592:2008. Corrosion Rating: 1 - Clean, dry & low humidity environments. Substrates: Softwood, Chipboard, MDF, Masonry (with plug).
This guide is for anyone using Timco Solo Wood Screws, providing essential information for optimal use. These screws offer a secure and efficient fastening solution for various woodworking projects. However, it's important to note the corrosion rating, which limits their use in certain environments. This guide will cover key features, usage scenarios, and troubleshooting tips to ensure you get the most out of your Timco Solo Wood Screws.
All features
Colour
Yellow
Model Part Number
50100SOLOC
Brand
Timco
Extended Product Information
FAQs
What materials can I use these screws with?
These screws are suitable for use with softwood, chipboard, MDF, and masonry (with plug).
Are these screws suitable for outdoor use?
These screws have a corrosion rating of 1, suitable for clean, dry, and low humidity environments. Use with caution in outdoor applications and consider applying a sealant to the screw heads.
What is the benefit of the wax lubrication?
Wax lubrication reduces the effort needed for screw insertion, increases driving torque, and offers enhanced corrosion resistance.
What is the thread coverage on these screws?
All sizes up to and including 75mm are fully threaded. Lengths 80mm and above have 70mm thread length.
What type of head do these screws have?
These screws feature a double countersunk head.
What is the finish of these screws?
The screws have a Zinc & Yellow finish.
Troubleshooting
Screw head strips during installation.
Use the correct size and type of driver bit, apply firm, steady pressure, and reduce the driving speed.
Screw does not fully countersink.
Ensure the pilot hole is the correct size. Apply more pressure while driving the screw.
Screw is difficult to start.
Apply pressure when starting the screw. Use a pilot hole, especially for hardwoods.
Screw is not holding securely.
Ensure the screw length is appropriate for the application. Check that the screw is fully engaged in the substrate and that the correct size pilot hole was used.
Pros and Cons
Pros
Efficient screw insertion due to wax lubrication.
Secure fixing with high pull-out resistance.
Double countersunk head for a clean finish.
Fast start due to the sharp point.
Suitable for various substrates, including softwood, chipboard, MDF and masonry (with plug).
Cons
Corrosion Rating 1 limits use to clean, dry, and low humidity environments.
Partially threaded design may not be suitable for all applications.
Requires pre-drilling when used with masonry.
Setup, Compatibility & Care
Choosing the Right Screw: Select the correct screw length based on the thickness of the materials being joined. Consider the thread length for your application.
Pre-Drilling: Pre-drilling is recommended, especially for hardwoods and when working near the edges of the material to prevent splitting.
Driver Bit: Use a suitable driver bit for the screw head type to ensure a proper fit and prevent damage to the screw head.
Compatibility: These screws are compatible with softwood, chipboard, MDF, and masonry (with plug). Avoid use in environments with high humidity or exposure to moisture.
Care: Ensure the screws are stored in a dry environment. When using in outdoor applications, apply a suitable sealant to the screw head to prevent corrosion, where necessary.
Power Tools Direct£0.64Visit shop 
Bradfords£3.88Visit shop 
B&Q£4.59Visit shop 
