Heatsure Cast Iron Woodburning Stove - 4.5Kw

This Heatsure woodburning stove is designed to burn dry, seasoned wood. Avoid burning treated wood, household waste, or coal, as these can damage the stove and flue, and release harmful emissions.

The airwash system works by directing a curtain of pre-heated air down the inside of the glass. This creates a barrier that helps to keep smoke and combustion gases away from the glass, reducing the buildup of soot and tar, and maintaining a clear view of the flames.

It is recommended to have your chimney or flue system professionally swept at least once a year if you burn wood occasionally, and up to twice a year if you use your stove frequently, especially during the peak heating season. This prevents creosote buildup and ensures safe operation.

A 4.5Kw stove is generally suitable for heating small to medium-sized rooms. The exact area heated can vary based on factors like room insulation, ceiling height, and external temperatures. Info needed: [Provide estimated square footage range, e.g., 'typically 10-20 square meters (100-200 sq ft)']

Yes, professional installation by a qualified and certified installer (e.g., HETAS registered in the UK) is highly recommended. This ensures the stove is installed safely, efficiently, and in compliance with all local building and fire safety regulations.

To maintain the cast iron exterior, ensure the stove is completely cool, then wipe it down with a soft, damp cloth. Avoid using harsh chemical cleaners or abrasive materials, which can damage the finish. For deeper cleaning or refreshing, specialized stove polish can be used.

Ensure the flue is warm before loading wood. Check for blockages in the chimney/flue. Open air vents fully before opening the stove door slowly.

Check if the wood is dry and seasoned. Ensure primary and secondary air vents are open sufficiently. Clean out excessive ash from below the grate.

Confirm you are using dry, seasoned wood. Ensure the airwash system is operating correctly (check secondary air intake settings). Try burning at a higher temperature for short periods to burn off deposits.

Verify all air controls are set correctly for optimal combustion. Check for drafts or open windows that might be drawing heat away. Ensure the flue is clear and operating efficiently.