Regatta Freesdale Hooded Hiking Waterproof Jacket - Blue - XL

The Isotex 30000 fabric offers a high level of waterproofing (30,000mm) and breathability (30,000 g/m²/24 hours), ensuring you stay dry from external rain and internal perspiration during strenuous activities.

This jacket is designed for waterproofing and breathability. For very cold weather, layering with an insulated mid-layer and a warm base layer is recommended, as the jacket itself is primarily a shell.

Regular washing with a technical fabric cleaner and reactivating the DWR finish by tumble drying on low heat or reapplying a DWR treatment will help maintain its waterproof performance.

Taped seams means that waterproof tape is applied over the stitching on the inside of the garment. This seals the tiny holes made by the sewing needle, preventing water from leaking through these potential entry points.

Yes, while designed for demanding conditions, its waterproof and breathable features make it suitable for everyday use, especially in unpredictable weather. However, its technical features might be more than needed for casual, dry conditions.

A breathability rating of 30,000 g/m²/24 hours means that a significant amount of moisture vapor (sweat) can escape from inside the jacket to the outside per square meter over a 24-hour period, helping you stay comfortable during physical activity.

The wire in the peak allows you to shape it for better rain deflection. Avoid ironing directly over the wire. When washing, ensure the hood is laid flat or allowed to air dry to maintain its shape.

Ensure the DWR finish is active. If not, reapply following the care instructions. Check that all main zippers are fully closed and secured. If the issue persists after reapplication of DWR and ensuring zippers are closed, the seam taping may be compromised and professional repair may be needed.

This can indicate insufficient ventilation or that the fabric's breathability is being overwhelmed by high moisture output. Ensure the main zipper and any ventilation zips (if present) are open enough for your activity level. The DWR may need refreshing if external water is not beading off. Always wear appropriate breathable base layers.

Clean the zipper teeth gently with a damp cloth and a small amount of mild soap to remove dirt or salt residue. Allow to dry completely, then try applying a silicone-based lubricant or wax specifically designed for zippers.

Check that the cord locks are properly engaged. If they appear damaged or worn, they may need replacement. Ensure the drawcords are threaded correctly through the adjusters.