Stanley Cable Staples - Type 7 CT100 10mm

You need a staple gun compatible with Type 7 CT100 staples. The gun must also be able to handle 10mm staples.

These staples can be used on wood, drywall, and similar materials where cables need to be secured.

There are 1000 staples per pack.

Yes, if the staples are driven too deeply or if the wrong size is used. Always ensure the staples are driven flush to the surface and do not pinch the cable.

These staples are available at most hardware stores and online retailers.

Always wear safety glasses. Be careful to avoid driving staples into electrical wires, and ensure the staple gun is disconnected from the power source when clearing jams.

Check the staple gun's power setting (if adjustable) and increase it. Ensure the gun is making firm contact with the surface. Examine the staple gun for any blockages.

Clear the staple gun magazine of any obstructions. Use only the correct type and size of staples. Clean and lubricate the staple gun according to the manufacturer's instructions.

Ensure the staple gun is held perpendicular to the surface. Check if the surface material is too hard for the staples. If necessary, use a more powerful staple gun or pre-drill pilot holes.