Shark Cordless Vacuum Cleaner - Anti-Hair Wrap with PowerFins - Red

Anti-Hair Wrap Technology is a unique feature that actively removes hair from the vacuum's brush-roll as you clean. This means less time spent cutting tangled hair out of the brush-roll and consistent cleaning performance, especially beneficial for homes with pets or long hair.

The Shark Cordless Vacuum offers up to 60 minutes of run-time in Eco mode on a single charge. The actual run-time may vary depending on the power mode selected, the attachments used, and the type of floor being cleaned.

Yes, absolutely. Thanks to its DuoClean floorhead with PowerFins, this vacuum is specifically designed to seamlessly transition and perform exceptionally well on all floor types, including deep-pile carpets, area rugs, and various hard floor surfaces like wood, tile, and laminate.

Powered Lift-Away allows you to detach the main pod from the vacuum's wand and floorhead, transforming it into a portable cleaner. This is perfect for easily cleaning stairs, upholstery, high-up areas like ceiling corners or curtains, and car interiors without having to carry the entire upright unit.

For optimal performance, the pre-motor foam and felt filters should be rinsed with cold water monthly, and the post-motor HEPA filter typically requires cleaning less frequently (refer to your user manual for exact schedule). Always ensure filters are completely air-dried for at least 24 hours before re-inserting them into the vacuum.

The dust bin has a capacity of 0.6 liters. It's recommended to empty it after each use or when the 'Max Fill' line is reached to maintain strong suction power.

Yes, the battery is removable, allowing for convenient charging both on and off the vacuum. Info needed: Whether replacement batteries are readily available for purchase to extend the vacuum's life or provide continuous cleaning.

Check if the dust bin is full and empty it. Clean all filters (pre-motor and post-motor) as per the care instructions, ensuring they are completely dry before re-inserting. Look for blockages in the hose, wand, and floorhead.

Ensure the charger is securely plugged into both the wall outlet and the battery. Try a different outlet to rule out a power source issue. Verify the battery is correctly seated if removable. If the issue persists, the battery may need replacement.

Check for any obstructions or blockages in the floorhead's brush-rolls. Remove any tangled hair or debris. Ensure the vacuum is in the correct mode for the floor type (e.g., carpet mode for brush-roll activation). Make sure the Lift-Away pod is correctly connected if applicable.

This could indicate overheating. Empty the dust bin, clean all filters, and check for blockages. Allow the vacuum to cool down for at least 45 minutes before attempting to use it again. A low battery charge could also cause this; ensure the battery is fully charged.