Best current price£16.47from B&Q
Shopping.co.uk recommended and popular offers
B&Q£16.47Visit shop B&Q - Tongue & Groove Osb 3 Loft Panel (L)1220mm (W)300mm (T)18mm Pack Of 3
Visit shop1 offer from £16.47
View price history by clicking the chart icon.
This guide is for anyone looking to install or renovate flooring using Kronobuild OSB 3 Tongue & Groove Floorboards. These boards are ideal for creating a new floor over existing flooring or joists, and can also be used for side walls. While they offer excellent structural support and ease of installation, remember to always account for necessary safety precautions and proper subfloor preparation. This guide will walk you through the key features, best practices, and troubleshooting to ensure a successful project.
| Brand | Kronobuild |
|---|
While the OSB 3 construction offers moisture resistance, it is not recommended for direct contact with water. Ensure proper sealing and use a waterproof flooring material on top.
Use screws or nails specifically designed for OSB. Follow manufacturer recommendations for fastener size and spacing.
Use a circular saw or a jigsaw for cutting. Always wear safety glasses and a dust mask when cutting.
Yes, but you will need to prepare the surface first by sanding and applying a primer designed for OSB.
Warranty information is not available in the product data, please refer to the manufacturer's website or contact the retailer for details.
Store the boards indoors in a dry, well-ventilated area, and keep them flat.
The recommended joist spacing depends on the thickness of the OSB and the anticipated load. Refer to local building codes and manufacturer recommendations for precise guidance.
Check for debris in the tongue and groove joints. Ensure the boards are aligned correctly and that the subfloor is level. You may need to use a rubber mallet to gently tap the boards into place.
Check the subfloor for any high or low spots. Use shims to level the boards or the flooring above, if necessary. If the joists are uneven, you may need to add blocking to level the joists themselves.
Identify and eliminate the source of moisture (e.g., leaks). Replace damaged boards. Ensure proper ventilation to reduce moisture buildup.
Setup: Before installation, ensure the subfloor (or joists) is level and structurally sound. Remove any debris and ensure a clean working surface. Acclimatize the OSB boards to the environment where they will be installed for at least 48 hours to minimize expansion or contraction after installation.
Compatibility: These floorboards are compatible with most standard construction materials. They can be used with a variety of flooring finishes and are compatible with standard fasteners (screws, nails).
Care: To extend the life of your floorboards, take the following steps:
MuteBoard 3 Acoustic Insulation Board - IKoustic - MMB2856From £2
Osb Tongue & Groove Wood Board - B&QFrom £20
Snowdon Timber Treated 4x1'' Timber 10 Pack - 2.4m x 100mm x 22mmFrom £99
Snowdon Timber Treated 4x1 Timber - 22mm x 100mm x 3.6m - Pack of 4From £63
Osb 3 - (L)2440mm (W)1220mm (T)18mm - B&QFrom £25
Snowdon Timber OSB Loft Board - 18 x 300 x 1220mmFrom £120
Snowdon Timber OSB Loft Board - 18mm x 300mm x 1.22m - 3 PackFrom £46
Snowdon Timber Untreated Reject Tongue and Groove Matchboard Cladding - 12 x 120 x 1200mmFrom £37
Snowdon Timber Treated Gravel Board - 2.4MFrom £42
Banded Scaffold Boards - 3.9m - 225mm - Metsä WoodFrom £38
Snowdon Timber Untreated Reject Tongue and Groove Matchboard Cladding - 12 x 120 x 900mmFrom £37
GoodHome Southwell Natural Oak Effect Laminate Flooring Sample - GoodHomeFrom £2