Duratherm Heated Towel Rail - Black

Currently unavailable

Currently unavailable
This guide is for homeowners looking to enhance their bathroom's functionality and aesthetics with a stylish and efficient heating solution. The DuraTherm Heated Towel Rail Radiator in Black offers a premium design to warm and dry towels while providing supplemental bathroom heat. A key consideration is that radiator valves are sold separately and must be purchased in addition to the rail.
| Colour | Black |
|---|---|
| Brand | DuraTherm |
No, radiator valves are not included and must be purchased separately. It is recommended to use valves compatible with your heating system.
This rail is primarily designed for central heating systems. However, it can be converted to dual-fuel use with the addition of a compatible heating element, which would allow for electric-only operation when the central heating is off.
The heat output ranges from 1059 to 2835 BTU, depending on the Delta T (the temperature difference between the water in the radiator and the room).
It is constructed from durable mild steel.
Clean using a soft, damp cloth. Avoid abrasive cleaners or chemicals that could damage the finish.
The dimensions are 1800mm in height, 450mm in width, and 90-110mm in depth.
The DuraTherm heated towel rail comes with a 10-year guarantee.
Ensure the central heating system is on and circulating water. Check that the radiator valves are fully open. If installed as dual-fuel, verify the heating element is powered and correctly set.
Turn off the water supply to the rail. Carefully tighten the connections at the valve points. If the leak persists, the seals may need replacing, or professional assistance may be required.
Air may be trapped in the system. Bleed the radiator by carefully opening the bleed valve at the top of the rail to release trapped air. Close the valve once water starts to drip out.
While constructed from mild steel, ensure the protective coating is not compromised. Clean the area gently with a soft cloth. Avoid excessive moisture exposure if the heating is not active.
Setup: Installation requires connecting the towel rail to your central heating system. This typically involves plumbing into existing pipework. Ensure you have the correct radiator valves (sold separately) and appropriate fittings. For dual-fuel operation, a compatible heating element will also need to be installed, often requiring an electrician.
Compatibility: This heated towel rail is designed for use with standard central heating systems. It is BS EN 442 compliant. Ensure your plumbing system can accommodate its dimensions (1800mm Height x 450mm Width x 90-110mm Depth).
Care: To maintain the matt black finish, clean the towel rail with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals, as these can damage the surface. Periodically check all connections to ensure they are secure and free from leaks.