Knauf Drywall Plasterboard - 12.5mm - Tapered Edge - 2700mm x 1200mm

While this board is moisture-resistant and ideal for bathrooms, it is not designed for direct constant water immersion. It should be used as a substrate for appropriate waterproofing membranes in shower areas.

After jointing and finishing, the surface is ready for direct decoration. Apply a suitable primer before painting for best results and durability.

The longer 2700mm length reduces or eliminates the need for horizontal joints in standard-height rooms, leading to faster installation and a cleaner, more uniform finish.

The tapered edge creates a shallow recess at board joints, which is specifically designed to accommodate jointing tape and compound, allowing for a smooth, seamless finish once completed.

The durable green liners provide strength and stability to the board. They also serve as a clear visual indicator on-site that the board is moisture-resistant.

Yes, it is suitable for commercial kitchens where humidity is present, provided it is part of a wall system that meets relevant building codes and fire safety regulations.

Ensure you are using a sharp utility knife. Make a deep score on the front face and snap firmly. A second pass on the back may be needed for thicker boards.

Ensure the tapered edges are clear of debris. Use sufficient jointing compound and tape, applying multiple thin coats rather than one thick one. Allow adequate drying time between coats.

While moisture-resistant, the board is not waterproof. Ensure adequate room ventilation. Check that the board is correctly installed and finished, with no gaps in jointing or sealing.

Adjust screw depth to embed the screw head just below the surface of the paper liner without breaking through to the gypsum core. Consider using a drywall screw gun with a depth setter.