Johnstone's Quick Dry Satin - Pink Cadillac

This paint is suitable for a wide range of interior and exterior surfaces including wood, metal, plaster, and previously painted surfaces.

It is quick-drying. Recoating is typically possible within a few hours, but check the specific drying times on the product label for best results.

It is self-undercoating, meaning a primer is not always necessary. However, for bare, porous, or problem surfaces, using a suitable primer is recommended for optimal adhesion and finish.

Clean brushes, rollers, and any spills with water immediately after use.

While durable, for areas with very high moisture or condensation, a paint specifically designed for such environments might be more suitable.

The approximate coverage is 12 square meters per litre (12m²/L).

Yes, you can generally use it over properly prepared oil-based paint. Lightly sanding the existing surface will improve adhesion.

Ensure application occurred in appropriate temperatures (above 10°C) and humidity levels. Avoid applying too thickly.

Apply paint thinly and evenly. Use a good quality brush or roller. Ensure paint is stirred well and not applied too dry.

The surface may not have been adequately prepared. Ensure it was clean, dry, and free from contaminants. A primer may be needed on difficult surfaces.

Colours can appear different under various lighting conditions. Ensure adequate light during application and drying. Check the batch number for consistency.