Upaintpvc UPVC Plastic Paint - Anthracite Grey - Gloss 250ml

UpaintPVC is suitable for uPVC, PVC, and rigid plastic surfaces including windows, doors, frames, conservatories, fascias, soffits, gutters, downpipes, and some plastic furniture. Always test on a small area first.

The surface must be clean, dry, and free from grease, dirt, and contaminants. For best adhesion, lightly abrade smooth surfaces and clean with a suitable solvent cleaner.

This paint is formulated for rigid plastics like uPVC. It is not recommended for flexible plastics. Test on an inconspicuous area if unsure.

Apply thinly and evenly with a good quality brush or a small foam roller. Stir the paint well before and during application.

The drying time can vary based on conditions, but it is a fast-drying formulation. Refer to the product packaging for specific drying times between coats and for full curing.

No, the paint is formulated with UV resistance to maintain colour stability and prevent fading, even with prolonged sun exposure.

The 250ml pot is designed for touch-ups and small repairs. For a standard-sized door, you may need a larger quantity. It is best suited for minor cosmetic work.

Clean gently with a soft, damp cloth. Avoid using abrasive cleaners or harsh solvents that could damage the gloss finish.

Ensure the surface was properly cleaned, degreased, and dry before application. Lightly abrade the surface if it was very smooth. Ensure adequate drying time was allowed between coats.

Apply paint in thin, even coats. Avoid applying too much paint at once. Ensure you are using a suitable brush or roller and applying with consistent strokes. Stir the paint thoroughly before and during use.

Colours can vary slightly depending on lighting and surface condition. The 250ml size is intended for touch-ups; for larger areas, consider purchasing a larger tin for a consistent batch. Always check the colour against existing surfaces before applying to a large area.

Ensure application conditions are within the recommended temperature and humidity range. Avoid applying in very humid or cold conditions. Ensure coats were not applied too thickly.